Fastener News Desk

NOVEMBER 19, 2023

This has taken the form of long lead times, as well as stalling of production when parts needed for manufacturing fail. There is a potential solution, however: additive manufacturing. The nature of AM can shorten lead times, too. Sometimes these production delays can be in the range of months. Industry 4.0

Supply Chain 52

Supply Chain Additive manufacturing 3D printing Manufacturing 52

MEM

SEPTEMBER 19, 2023

In the rapidly evolving landscape of manufacturing, the spotlight shines brightly on Artificial Intelligence (AI), the catalyst behind a transformative wave. AI is revolutionizing processes, enhancing efficiency, and propelling manufacturing into a future brimming with possibilities. The result?

Manufacturing 98

Manufacturing Pharmaceutical Assembly Line Supply Chain 98

E&T

DECEMBER 16, 2022

The report warned that the country was already “rapidly falling behind the EU” on green manufacturing investment and called for the government to provide cash incentives for green manufacturing businesses to set up in the UK. per cent, according to figures from the Office for National Statistics (ONS).

Manufacturing 98

Manufacturing Automotive Supply Chain Lead Time 98

Dinesh Mishra

JANUARY 30, 2023

MAKERS AND MOVERS: STRATASYS INDIA Makers and Movers 2023 started off to a scintillating start with a highly informative and engaging conversation between Rajiv Bajaj, the Managing Director of Stratasys India & SEA, and our editor on additive manufacturing and how it is transforming the manufacturing industry. 34 million in 2022.

3D printing 52

3D printing Manufacturing Additive manufacturing Automotive 52

Manufacturer's Monthly

AUGUST 9, 2023

Markforged has been at the forefront of additive manufacturing for the past 10 years, helping manufacturers revolutionise the industrial production landscape by bringing 3D printing right to the factory floor. This advancement opened new possibilities for manufacturing stronger and more resilient parts.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

SMMT

JUNE 26, 2023

UK Automotive calls for cross-party adoption of five pledges as part of an industrial strategy to drive industrial transformation, mobility for all, upskilling, global trade, and clean, affordable energy. Commitment would deliver green automotive manufacturing growth and consumer choice in a thriving, accessible EV market.

Automotive 106

Automotive Supply Chain Manufacturing Lead Time 106

Fabricating & Metal Work

FEBRUARY 9, 2024

One Off Robotics and Meltio are teaming up to develop a breakthrough, ready-to-use additive manufacturing work cell. Meltio , a disruptive wire-laser metal deposition additive manufacturing technology leader, has announced a collaboration with One Off Robotics , an industry leader in robotic additive manufacturing (AM).

Additive manufacturing 52

Additive manufacturing Robotics Robotics 3D printing 52

Fastener News Desk

APRIL 3, 2023

Chair of the Institute for Supply Management ® (ISM ® ) Manufacturing Business Survey Committee: “The March Manufacturing PMI ® registered 46.3 Chair of the Institute for Supply Management ® (ISM ® ) Manufacturing Business Survey Committee: “The March Manufacturing PMI ® registered 46.3 percent, 1.4

Manufacturing 52

Manufacturing Supply Chain Apparel Lead Time 52

Fastener News Desk

OCTOBER 4, 2023

2, 2023 /PRNewswire/ — Economic activity in the manufacturing sector contracted in September for the 11th consecutive month following a 28-month period of growth, say the nation’s supply executives in the latest Manufacturing ISM ® Report On Business ®. A Manufacturing PMI ® above 48.7 Fiore , CPSM, C.P.M.,

Manufacturing 52

Manufacturing Supply Chain Beverage Apparel 52

Fastener News Desk

MAY 4, 2023

Chair of the Institute for Supply Management ® (ISM ® ) Manufacturing Business Survey Committee: “The April Manufacturing PMI ® registered 47.1 Chair of the Institute for Supply Management ® (ISM ® ) Manufacturing Business Survey Committee: “The April Manufacturing PMI ® registered 47.1 percent, 0.8

Manufacturing 52

Manufacturing Supply Chain Electronics Beverage 52

Fastener News Desk

SEPTEMBER 5, 2023

1, 2023 /PRNewswire/ — Economic activity in the manufacturing sector contracted in August for the 10th consecutive month following a 28-month period of growth, say the nation’s supply executives in the latest Manufacturing ISM ® Report On Business ®. The report was issued today by Timothy R. Fiore , CPSM, C.P.M.,

Manufacturing 64

Manufacturing Beverage Composites Apparel 64

Fastener News Desk

DECEMBER 4, 2023

1, 2023 /PRNewswire/ — Economic activity in the manufacturing sector contracted in November for the 13th consecutive month following a 28-month period of growth, say the nation’s supply executives in the latest Manufacturing ISM ® Report On Business ®. A Manufacturing PMI ® above 48.7 Fiore , CPSM, C.P.M.,

Manufacturing 52

Manufacturing Beverage Supply Chain Apparel 52

Manufacturer's Monthly

NOVEMBER 29, 2022

The expression “supply chain issues” is familiar to all Australians, from the manufacturer whose production line has stalled awaiting parts from an overseas supplier to the housewife walking past empty shelves in her local supermarket. The benefits of thinking outside the traditional manufacturing box can be seen all around the world.

Manufacturing 98

Manufacturing 3D printing Supply Chain Prototype  98

Canadian Manufacturing

MARCH 1, 2023

’s manufacturing sector WOODBRIDGE — On Mar. ’s manufacturing sector WOODBRIDGE — On Mar. million non-repayable contribution for Canadian Manufacturers & Exporters (CME) to launch the Technology Investment Program (TIP). Federal government announces nearly $16M for Ont.’s This includes an $8.8-million

Manufacturing 40

Manufacturing Supply Chain Composites Automotive 40

Fabricating & Metal Work

FEBRUARY 18, 2024

In addition to an industry-leading selection with more than 5,000 standard taps, Vergnano can design custom taps and deliver them with short lead times. Vergnano manufactures over 2 million taps a year in their 161,000 square foot (15,000 square meters) factory located in Chieri, Italy.

Aerospace 52

Aerospace Lead Time Automotive Manufacturing 52

Control Engineering

AUGUST 14, 2022

Manufacturers can maximize the space with modular enclosures and get added flexibility on the plant floor. Modular enclosures also can be connected to cloud-based tools, which can create streamlined workflows for installing electrical controls, wiring and more, giving the user deeper insights into what’s happening on the manufacturing floor.

Manufacturing 52

Manufacturing Electronics Automation Beverage 52

Mold Making Technology

AUGUST 29, 2023

The 5X-24’s ability to rotate and tilt the tool in multiple directions gives it to access hard-to-reach surfaces, all in one setup, which increases accuracy and reduces labor and lead time for faster mold production. Expand Machinery offers 12" and 24" trunnion sizes in its five-axis machine lineup.

Lead Time 52

Lead Time Aerospace Automotive Manufacturing 52

AU Manufacturing

AUGUST 7, 2022

Zoomo partnered with Melbourne-based custom automotive designer, Skunk Machine, to design, develop and assemble the frame for the prototype. This would lead to increased costs and a significantly longer lead time. Frame manufacturing is certainly an art, especially for more complex shapes.

Prototype  76

Prototype  Supply Chain Automotive Lead Time 76

AU Manufacturing

NOVEMBER 24, 2022

The expression “supply chain issues” is familiar to all Australians, from the manufacturer whose production line has stalled awaiting parts from an overseas supplier to the housewife walking past empty shelves in her local supermarket. The benefits of thinking outside the traditional manufacturing box can be seen all around the world.

Supply Chain 69

Supply Chain Manufacturing 3D printing Prototype  69

Mold Making Technology

MAY 1, 2024

While certain segments, such as plastics material pricing and resin manufacturing, grappled with equilibrium adjustments, others, like the mold for plastics trade, mirrored global economic oscillations. Q: Are you optimistic about the manufacturing economy in the U.S. manufacturing. reported a year earlier. in particular?

Supply Chain 52

Supply Chain Automotive Manufacturing Fit 52

MEM

NOVEMBER 18, 2022

In a world where we demand great customization, reduced waste, and quick turnaround time, on-demand manufacturing keeps getting popular. Traditional manufacturing is not usually cost-effective unless a small quantity is needed. On-demand manufacturing incorporates several components to meet their needs.

Supply Chain 52

Supply Chain Manufacturing Rapid prototyping Prototype  52

E&T

JANUARY 13, 2023

Based on data from the Society of Motor Manufacturers and Traders (SMMT), this could be the result of different factors that are currently affecting the automotive industry, including rising inflation and cost of raw materials. Due to the current cost of battery manufacturing, many EVs cost more than a comparable ICE vehicle.

Automotive 111

Automotive Agile manufacturing Supply Chain Manufacturing 111

Control Engineering

AUGUST 17, 2022

Historically, vendors like ABB, WEG, Siemens and Nidec have had minimal difficulty securing supply of key raw materials used in the manufacturing of their motors. Electric steel is used heavily in the manufacturing of electric motors. The material is key to producing the electromagnetic field used to turn the rotor.

Automotive 52

Automotive Lead Time Bill of Materials Supply Chain 52

Design World

JULY 29, 2022

Building on the success of their lead screw technology, this combination of precision-rolled screw and compact nut is driving exceptional performance from an economical package. The main benefit of ball screws is higher efficiency and accuracy, making them ideal for a variety of industrial and automotive applications.

Form 189

Form Lead Time Automotive Automation 189

Mold Making Technology

AUGUST 3, 2023

They include representatives from mid- to large-size OEMs and molding companies within the automotive, medical, packaging, consumer goods, and appliances and electronics industries. We will never ask another mold manufacturer to judge entries. They have also expressed very clearly their passion for their work and a desire to WIN!

Consumer Goods 52

Consumer Goods Form Lead Time Electronics 52

Canadian Manufacturing

FEBRUARY 5, 2024

Credit: Unirope) Unirope is a manufacturer and distributor of high-performance wire rope and rigging products. Justin Brown, president at Unirope, said: “At a minimum we have cut lead times in half, and in the best case we have seen a 400% improvement. and Europe.

Fit 59

Fit Bottleneck Lead Time Automotive 59

Additive Manufacturing

SEPTEMBER 8, 2022

Nearly all solutions for rapid production of sheet metal parts require custom forming tools, molds, or dies, which typically have long lead times and are expensive to produce. A video showing the production of parts on the Figur G15 can be viewed at figur.desktopmetal.com , where manufacturers can also reserve a system.

Form 52

Form Lead Time Aerospace Automotive 52

Manufacturer's Monthly

SEPTEMBER 7, 2022

Mackay Consolidated Industries is a 100 per cent Australian-owned and operated business that began in 1932 as a small privately owned company that specialised in the supply of OEM-approved automotive parts. In Australia, Mackay distributes simple, effective solutions for controlling vibrations through Motion Australia’s businesses.

Benchmarking 97

Benchmarking Composites Lead Time Automotive 97

Fabricating & Metal Work

OCTOBER 27, 2023

The company is a Montreal manufacturer of custom precision tools that sells to various industries including aerospace, recreational vehicles, rail and automotive. With its high-performance holemaking tools, including drills and special end mills, Clortech expanded into the automotive industry.

Aerospace 59

Aerospace Automotive Form Lead Time 59

Additive Manufacturing

OCTOBER 3, 2022

These materials are carrier resins for masterbatches that empower sustainable innovation in the plastics industry by helping OEMs and molders in the packaging, automotive and consumer goods segments decrease reliance on virgin plastics. Holland Company appeared first on Additive Manufacturing (AM). This helps M.

Consumer Goods 52

Consumer Goods Supply Chain Lead Time Automotive 52

Canadian Manufacturing

AUGUST 17, 2022

an aerial equipment and material handling company, announced it has expanded its product line to offer nine new aerial lift machines from construction manufacturing company, XCMG. XCMG was ranked third place for top construction equipment manufacturers globally by KHL Group’s “Yellow Table 2021”.

Lead Time 52

Lead Time Supply Chain Manufacturing Automation 52

Dinesh Mishra

AUGUST 23, 2022

North American Lighting (NAL), a Koito Group Company, has been manufacturing automotive lighting systems for vehicle manufacturers since 1983. For a manufacturer like NAL, which works with some of the largest automotive OEMs in America like Ford and GMC, speed and precision are critical.

Assembly Line 52

Assembly Line 3D printing Lead Time Prototype  52

Dinesh Mishra

SEPTEMBER 19, 2022

Gühring was the first tool manufacturer to be awarded the VW Group Award for outstanding performance as a supplier. The Indian machine tool industry will play a vital role in the manufacturing boost given by the central government through the “Make in India” and “ Atmanirbhar Bharat ” schemes. The Company’s Social Media presence.

Aerospace 52

Aerospace Automotive Cycle time Benchmarking 52

Mold Making Technology

APRIL 13, 2023

Photo Credit: Next Chapter Manufacturing Looking over the vast landscape of additive manufacturing (AM) technologies, the various material options and the number of experts in the market can leave you more confused than ever. These were both cutting-edge technologies for reducing lead times, but many hurdles still existed.

3D printing 98

3D printing Cycle time Additive manufacturing Lead Time 98

MEM

SEPTEMBER 7, 2023

Formerly known as PK Engineering and traditionally a supplier to laboratories and the instrumentation, aerospace and process industries, the company rebranded as NuMachine in 2020 as it looked to break into the automotive and electric vehicle sector.

Cycle time 52

Cycle time Automotive Prototype  Aerospace 52

Mold Making Technology

JANUARY 10, 2024

Most mold customers hail from the automotive and consumer goods markets, but the company also makes tooling for the aerospace and medical segments. The company builds molds for customers in the automotive, consumer goods, aerospace,= and medical segments and also injection molds products for consumer goods.

Consumer Goods 52

Consumer Goods Lead Time Automotive Aerospace 52

Fabricating & Metal Work

OCTOBER 2, 2023

ABB recently announced an investment of $280 million to expand its manufacturing footprint in Europe and build a new state-of-the-art ABB Robotics European Campus in Västerås, Sweden. the new facility in Sweden will strengthen our capabilities in serving our customers in Europe with locally manufactured products in a growing market.

Robotics 52

Robotics Robotics Automation Pharmaceutical 52