Additive Manufacturing

JULY 29, 2022

DARMSTADT, Germany, July 28, 2022 — Scientists at Fraunhofer IGD have devised a purely geometric and algorithmic method for the elimination of stair-step artifacts in multi-material 3D printing. Stair-step artifacts are unavoidable in conventional 3D printing processes. Read full paper here.

3D printing 98

3D printing Additive manufacturing Function Manufacturing 98

Additive Manufacturing

OCTOBER 1, 2022

This lack of interaction is unfortunate, as the established medical 3D printing communities continue to lay a strong foundation from which the emerging tissue-restorative 3D printing communities can further build upon but may not be aware.

3D printing 97

3D printing Function Logistics Additive manufacturing 97

Additive Manufacturing

MARCH 13, 2023

The beauty of today’s manufacturing environment is that anyone can start a 3D printing service bureau and begin printing parts today. According to a recent report by Persistence Markets , the 3D printing service bureau industry is projected to surge eight times the size of its present state over the next decade.

3D printing 98

3D printing Additive manufacturing Assembly Line Manufacturing 98

Modern Machine Shop

SEPTEMBER 17, 2023

While searching for a realistic use case for additive manufacturing, the Siemens Industry team came across the steering knuckle in its eRods, which are essentially electric dune buggies. One presentation in particular illustrated the power of the digital thread. Photos provided by Siemens Digital Industries.

3D printing 99

3D printing Additive manufacturing Manufacturing Fit 99

Manufacturer's Monthly

OCTOBER 18, 2023

To address growing supply chain pressures, manufacturers are turning to Additive Manufacturing (AM) to create quality, cost-efficient products faster. Plastic thermoforming companies like Duo Form have discovered how to leverage large-format extrusion 3D printing using low-cost plastic pellets to gain a competitive edge.

3D printing 98

3D printing Form Lead Time Additive manufacturing 98

AU Manufacturing

FEBRUARY 23, 2023

Conflux Technology will be showcasing its increasing line of customisable additively manufactured heat exchangers at this year’s Avalon Air show in the Victorian Government Pavilion. In a press release, the company said it developed customisable heat exchangers using its additive manufacturing thermal solutions.

3D printing 87

3D printing Supply Chain Aerospace Additive manufacturing 87

AU Manufacturing

OCTOBER 10, 2022

Every 3D printing process competes with classic manufacturing strategies such as casting or milling in terms of mechanical properties, time factors and cost-effectiveness. It is also in competition with alternative 3D printing technologies. Media Release by AIM3D. due to the layer-based build process.

3D printing 92

3D printing Additive manufacturing Form Manufacturing 92

AU Manufacturing

FEBRUARY 7, 2023

Undergraduate engineering students in UC San Diego’s Yonder Deep student organisation are seeking to develop and 3D-print a completely autonomous, low-cost, modular underwater vehicle (AUV) that will make it possible for scientists to affordably collect oceanographic and climatic data.

3D printing 79

3D printing Prototype  Additive manufacturing Manufacturing 79

AU Manufacturing

APRIL 5, 2023

Australian 3D-printed heat exchanger manufacturer Conflux Technology is partnering with Rocket Factory Augsburg to develop aerospace heat exchangers as part of the Australian Space Agency’s Moon to Mars Initiative. This effort is also critical to the agency’s mission of transforming and growing the Australian space sector.

3D printing 81

3D printing Aerospace Supply Chain Additive manufacturing 81

AU Manufacturing

SEPTEMBER 19, 2022

A world-first study led by Monash University engineers has demonstrated how cutting-edge 3D-printing techniques can be used to produce an ultra-strong commercial titanium alloy – a significant leap forward for the aerospace, space, defence, energy, and biomedical industries.

3D printing 83

3D printing Aerospace Additive manufacturing Manufacturing 83

AU Manufacturing

FEBRUARY 28, 2023

Microfabrication start-up Horizon Microtechnologies said that its in-house technology for template-based 3D microfabrication will help in the elimination of electro-static discharge (ESD) in applications, which would benefit from 3D printing by combining precision polymer micro-AM and ESD compliance.

3D printing 83

3D printing Compliance Electronics Function 83

E&T

AUGUST 14, 2023

I think it’s imminent that the seafood supply could be very limited in the future,” said graduate student Poornima Vijayan, presenting the work at a meeting of the American Chemical Society. “We In the near future, the team plans to develop prototypes and assess how easily they can be scaled up for mass market food manufacturing.

3D printing 98

3D printing Composites Prototype  Sourcing 98

AU Manufacturing

APRIL 19, 2023

Our multidisciplinary team has created one of the most sophisticated 3D printing environments for ocular research in the world,” said Alex Hui, OD, PhD, FAAO, head of Biosciences at CORE. Another CORE program that will be presented in New Orleans created a biodegradable bio-ink for the fabrication of ophthalmic equipment.

3D printing 71

3D printing Pharmaceutical Additive manufacturing Manufacturing 71

i4.0 today

NOVEMBER 28, 2024

Cookson Industrial aims to showcase how UK subcontractors can unlock the potential of precious metals in advanced manufacturing applications at Southern Manufacturing & Electronics Show 2025 (4-6 February 2025). Cookson Industrial’s state-of-the-art additive manufacturing facility is located in Birmingham. Today Magazine.

Additive manufacturing 52

Additive manufacturing Manufacturing 3D printing Electronics 52

Dinesh Mishra

DECEMBER 24, 2024

The additively manufactured MaxiMill 211-DC indexable insert milling system showcases how proper nozzle positioning can be a true difference maker. Its for such stubborn instances that we developed our 3D-printed indexable insert milling system MaxiMill 211-DC, says Robert Frei, Product Manager at CERATIZIT.

3D printing 52

3D printing Additive manufacturing Aerospace Manufacturing 52

MESA

JULY 24, 2023

Join us at America’s new industrial additive manufacturing event. This new industrial additive manufacturing event features a speakers lineup that includes leading additive manufacturing experts from aerospace, medical, academia and contract manufacturing. Register for Formnext Forum.

Additive manufacturing 130

Additive manufacturing Manufacturing 3D printing Aerospace 130

Additive Manufacturing

OCTOBER 26, 2022

The value proposition of medical 3D printing is massive. Certain devices on the market or in use with patients now would not have been able to have been manufactured previously. Certain devices on the market or in use with patients now would not have been able to have been manufactured previously.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Fit 98

Manufacturer's Monthly

MARCH 13, 2023

Matthew Hunter, national manager, emerging technology, Konica Minolta breaks down to Manufacturers’ Monthly the key opportunities and challenges in growing sovereign capability in Australia’s defence and aerospace manufacturing ecosystem. The aerospace and defence industries face several unique and complex challenges.

Additive manufacturing 96

Additive manufacturing Aerospace 3D printing Supply Chain 96

Frost & Sullivan Manufacturing

OCTOBER 22, 2024

A variety of industries — automotive, healthcare, food and beverages, and beyond — are leveraging innovative eco-friendly manufacturing solutions by harnessing sustainable materials. 30 countries have passed single-use plastic bans, accelerating demand for eco-friendly manufacturing.

Value chain 52

Value chain Manufacturing Supply Chain 3D printing 52

Manufacturer's Monthly

APRIL 1, 2025

Image: Swinburne University Swinburne University of Technology’s presence at the Avalon Australian International Airshow 2025 showcased its contributions to aerospace, advanced manufacturing, detect and protect research, and space technology. Testlab and the Space Technology and Industry Institute.

3D printing 54

3D printing Aerospace Industry 4.0 Industry 4.0 54

Additive Manufacturing

JANUARY 11, 2023

Additive manufacturing hardware solution providers were once again busy in 2022. Highlights included more options for printing bigger and smaller, printing electronics and composites, and a couple of open platforms to allow more material development for industry and researchers.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

Manufacturer's Monthly

AUGUST 5, 2024

Image: Tongpool/stock.adobe.com A new Advanced Manufacturing Skills Lab at the TAFE Queensland Cairns campus presents new home for maritime, aviation and food manufacturers to hone their skills for the region’s in-demand blue collar careers. Skillset from 2025.

Advanced manufacturing 109

Advanced manufacturing Industry 4.0 Industry 4.0 3D printing 109

AU Manufacturing

AUGUST 29, 2022

SmarTech Analysis, the leading provider of market data and consulting services to the additive manufacturing industry, has released a flagship data product, Polymer Parts Produced: AM Applications Market Analysis, which estimates the production volumes and resulting estimated market values of various polymer additively manufactured components. .

3D printing 72

3D printing Additive manufacturing Prototype  Manufacturing 72

Manufacturer's Monthly

MARCH 16, 2025

These ponds, which are present worldwide and used in areas of high rainfall or small populations such as the NT, allow inorganic matter to pass into wastewater management systems by design. The post Tech developed in NT to clean up global wastewater appeared first on Manufacturers' Monthly.

Prototype  69

Prototype  Rapid prototyping 3D printing Fit 69

Additive Manufacturing

NOVEMBER 7, 2022

The medical additive manufacturing and 3D printing community is always working to use technology to improve patient care and change lives. Rodriguez, MD and the NYU Langone plastic surgery team, clinical engineers from Materialise 3D printed models and surgical guides for both the donor and recipient based on the surgeon’s plan.

3D printing 95

3D printing Additive manufacturing Function Manufacturing 95

Additive Manufacturing

SEPTEMBER 9, 2022

The ability to proactively use 3D digital data in the medical space really came to fruition with the start of additive manufacturing in the late 1980s. Use of 3D scan data of has also enabled the evolution of patient-specific 3D printed prosthetics over the last 30 years, and more recently, new inventions such as ‘dentures in a day’.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 98

Additive Manufacturing

DECEMBER 7, 2022

Within additive manufacturing, there is a big focus on part and application qualification. What does that mean for the qualification of 3D printed parts? related to the Additive Manufacturing Policy. Below are brief descriptions of each bin and examples of their usage within the Marine Corps’ present-day system.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

Mold Making Technology

JULY 5, 2023

The team has developed a hybrid approach to producing mold inserts using DMLS printers and designing and printing each component to reduce internal stresses. Come to this session to learn some 3D printing best practices for producing hybrid tool inserts via recent real-world applications examples.

3D printing 52

3D printing Additive manufacturing Lead Time Sourcing 52

AU Manufacturing

MAY 6, 2023

Researchers at the University of Hawaii’s Manoa College of Engineering have taken a huge step ahead in sweat analysis with an innovative 3D-printed wearable sweat sensor known as the “sweatainer.” The post Researchers develop 3D-printed wearable sweat analysis device appeared first on Australian Manufacturing.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

i4.0 today

OCTOBER 18, 2022

When it comes to history and awareness, polymer additive manufacturing leads the 3D printing industry. The first type of 3D printing to be invented in the 1980s was stereolithography, while thermoplastic filament extrusion holds the most public recognition amongst additive technologies. billion in 2033.

3D printing 52

3D printing Prototype  Additive manufacturing Consumer Goods 52

AU Manufacturing

JUNE 21, 2023

Researchers at Stockholm’s KTH Royal Institute of Technology have 3D-printed what they claim as the world’s smallest wine glass – nearly indistinguishable with the naked eye – with a rim the width of a human hair. The concerns when integrating 3D printing methods are usually different for different applications.

3D printing 52

3D printing Robotics Robotics Manufacturing 52

i4.0 today

JANUARY 16, 2025

The NEC Birmingham will once again play host to Smart Manufacturing Week (SMW) the UKs largest festival of advanced manufacturing and engineering on 45 June 2025. Visitor Trails offer an exciting way to explore the vast show floor, guiding attendees to the most relevant exhibitors and must-see presentations.

Smart manufacturing 52

Smart manufacturing Manufacturing 3D printing Advanced manufacturing 52

Manufacturer's Monthly

APRIL 17, 2024

Image: Prime Creative Media Australian Manufacturing Week (AMW) officially opened yesterday, as hundreds of innovators and industry leaders gathered in one place, it was clear there was a shared enthusiasm and excitement for the manufacturing industry.

Manufacturing 105

Manufacturing 3D printing Robotics Robotics 105

Modern Machine Shop

MARCH 11, 2025

To illustrate the power of a laser powder bed fusion (LPBF) metal 3D printing system that is open source, Venkata Karthik Nadimpalli passes a magnet over a sleeve of metal filings held over a solid, 3D printed block of steel. It is likely the most widely used additive manufacturing process for metal part production.

3D printing 59

3D printing Sourcing Additive manufacturing Process control 59

MEM

MAY 31, 2023

The UK’s definitive and most influential 3D printing and additive manufacturing event, TCT 3Sixty will take place on 7-8th June at the NEC, Birmingham. The TCT Introducing Stage will feature presentations from Nexa3D, Massivit, Ricoh, Nano Dimension, EOS, Ultimaker and Wayland Additive.

3D printing 52

3D printing Additive manufacturing Manufacturing Aerospace 52

MEM

MAY 15, 2023

Manufacturing: TCT Group Announces the Inaugural TCT UK User Group In an effort to address the challenges that are stifling additive manufacturing adoption in the UK, the TCT Group are delighted to announce details of the inaugural TCT UK User Group meeting set to take place on the 6th June, the day before TCT 3Sixty at the NEC, Birmingham.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Additive Manufacturing

NOVEMBER 2, 2022

Various research points to three major reasons companies do not rush to adopt advanced technologies, such as 3D printing or Digital Twin methodologies. Melkote, Can Manufacturing Respond to the Great Resignation? Medical innovations include 3D printing of titanium hip cups with porous structures that aid in osseo integration.

3D printing 98

3D printing Composites Additive manufacturing Advanced manufacturing 98