AU Manufacturing

FEBRUARY 23, 2023

Conflux Technology will be showcasing its increasing line of customisable additively manufactured heat exchangers at this year’s Avalon Air show in the Victorian Government Pavilion. In a press release, the company said it developed customisable heat exchangers using its additive manufacturing thermal solutions.

3D printing 87

3D printing Supply Chain Aerospace Additive manufacturing 87

Additive Manufacturing

JANUARY 11, 2023

Additive manufacturing hardware solution providers were once again busy in 2022. Highlights included more options for printing bigger and smaller, printing electronics and composites, and a couple of open platforms to allow more material development for industry and researchers.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

Manufacturer's Monthly

AUGUST 9, 2023

Markforged has been at the forefront of additive manufacturing for the past 10 years, helping manufacturers revolutionise the industrial production landscape by bringing 3D printing right to the factory floor. A year later, the company launched Eiger, its cloud- based 3D printing software.

Additive manufacturing 79

Additive manufacturing 3D printing Manufacturing Supply Chain 79

Fabricating & Metal Work

JULY 21, 2023

With recent climate summits such as Cop26 and Cop27, and the ongoing Paris Agreement providing the framework for ambitious climate goals, manufacturers are also accepting responsibility and placing increased emphasis on the importance of reducing their carbon emissions.

3D printing 52

3D printing Additive manufacturing Supply Chain Lean manufacturing 52

i4.0 today

APRIL 18, 2024

The University of Wolverhampton (UK) and 3D printing global leaders EOS , and AMCM , have today announced they will join forces to launch a new UK Centre of Excellence for Additive Manufacturing (AM). To learn more, visit www.eos.info and www.amcm.com. Today Magazine.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 59

Fabricating & Metal Work

FEBRUARY 9, 2024

One Off Robotics and Meltio are teaming up to develop a breakthrough, ready-to-use additive manufacturing work cell. based company, One Off Robotics, is one of Meltio’s key partners in supporting wire-laser metal 3D printing in the USA.

Additive manufacturing 52

Additive manufacturing Robotics Robotics 3D printing 52

i4.0 today

JANUARY 22, 2024

3D printing is a digital manufacturing technology, meaning that a large part of the production process is managed online. However, finishing the printed components still has some manual process steps. As its name implies, additive manufacturing adds material to create an object.

3D printing 52

3D printing Computer-Aided Design (CAD) Additive manufacturing Rapid prototyping 52

Automation Mag

NOVEMBER 22, 2023

The University of Waterloo’s Multi-Scale Additive Manufacturing (MSAM) Lab opened its doors to a new facility for next-generation metal 3D-printing research. Launched in 2017, Waterloo’s MSAM Lab has reportedly become the largest metal additive manufacturing (AM) academic facility in Canada.

Additive manufacturing 84

Additive manufacturing 3D printing Manufacturing Prototype  84

AU Manufacturing

JUNE 7, 2023

A recent report from SmarTech Analysis revealed that the metal additive manufacturing (AM) services revenue is forecasted to reach USD 16.1 Titled, “The Market for Metal Additive Manufacturing Services: 2023-2031,” the report has pegged revenues for metal AM services at USD 3.8 billion (AUD 24 billion) by 2031.

3D printing 52

3D printing Additive manufacturing Prototype  Aerospace 52

Modern Machine Shop

DECEMBER 1, 2022

A donut-shaped machine tool component called the AKZ FDS adapter illustrates the increasingly intricate links between additive manufacturing (AM) and CNC machining. Here is the 3D printed adapter. Because this part is now made additively, what used to be an assembly of 71 components now is an assembly of five.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Form 98

i4.0 today

OCTOBER 18, 2022

When it comes to history and awareness, polymer additive manufacturing leads the 3D printing industry. The first type of 3D printing to be invented in the 1980s was stereolithography, while thermoplastic filament extrusion holds the most public recognition amongst additive technologies.

3D printing 52

3D printing Prototype  Additive manufacturing Consumer Goods 52

MEM

NOVEMBER 8, 2022

Graphite Additive Manufacturing Ltd is an industry-leading 3D printing consultancy that specialises in building complex designs and high-performance components in tailored materials. Graphite Additive Manufacturing leads the way with beautifully engineered 3D printing.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Prototype  52

Automation Mag

AUGUST 17, 2022

Stratasys signed a definitive agreement to acquire the additive manufacturing materials business of Covestro. In addition, it will bring in a portfolio of approximately 60 additive manufacturing materials and an IP portfolio comprised of hundreds of patents and patents pending.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Automotive 52

Gary Mintchell

DECEMBER 22, 2022

here is a report Zebra compiled regarding attitudes and expectations of both consumers and managers in the automotive industry. However, navigating the growing demand comes with challenges as 68% of automotive industry decision-makers say they are under high pressure to produce next-generation (i.e., electric) vehicles.

Automotive 130

Automotive Supply Chain 3D printing Manufacturing 130

Additive Manufacturing

NOVEMBER 16, 2022

Essen/Marl, Germany/November 15, 2022 — Evonik launched three new INFINAM® photopolymers for industrial 3D applications, expanding the photo-resins product line launched last year for use in common UV-curing 3D printing processes such as SLA or DLP. INFINAM® RG 2000 L is a photo-resin for the demanding eyewear industry.

3D printing 52

3D printing Additive manufacturing Value chain Prototype  52

Additive Manufacturing

NOVEMBER 20, 2022

The partnership centers on an Integrated Post Processing Solution providing full support through the entire 3D printing production workflow. In addition to the full-scale Digital Manufacturing System, AMT has also designed a modular automated loader system to further optimize the post-processing workflow.

3D printing 52

3D printing Automotive Additive manufacturing Digital manufacturing 52

i4.0 today

OCTOBER 18, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. Current 3D printing simply cannot deliver the level of precision and material strength required for these applications.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

i4.0 today

SEPTEMBER 23, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. Current 3D printing simply cannot deliver the level of precision and material strength required for these applications.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

Additive Manufacturing

MAY 3, 2023

Berkeley, CA (May 2, 2023) – polySpectra , maker of the world’s most rugged photopolymer resins, has announced its third Cyclic Olefin Resin (COR) material for durable 3D printing. At RAPID + TCT 2023, polySpectra has unveiled COR Bio, expanding the company’s reach into new markets with its first biocompatible 3D printing material.

3D printing 52

3D printing Additive manufacturing Sourcing Prototype  52

Fastener News Desk

NOVEMBER 19, 2023

There is a potential solution, however: additive manufacturing. and the cloud are enabling a vast digital manufacturing network in which a print job can be initiated in one part of the world and finished in another, exactly where the part is needed. Sometimes these production delays can be in the range of months.

Supply Chain 52

Supply Chain Additive manufacturing 3D printing Manufacturing 52

MEM

NOVEMBER 15, 2022

Hexagon has partnered with Research Institutes of Sweden (RISE), a national research and development (R&D) centre, to provide software that will help meet a Swedish initiative to advance the use of additive manufacturing (AM) technologies and accelerate the adoption of innovative and sustainable processes in European industry.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Industry 4.0 59

Mold Making Technology

FEBRUARY 28, 2023

Photo Credit: 3Dnatives The Society of Plastics Engineers (SPE) has acquired 3Dnatives , a French company that produces a media platform and international events for professionals in 3D printing, additive manufacturing (AM) and their related market applications. of the $12.8 Every month, over 1.2 Brussels and Paris.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

Additive Manufacturing

FEBRUARY 28, 2023

DANBURY, CT – February 27, 2023: The Society of Plastics Engineers (SPE) has acquired 3Dnatives, a French company that produces a media platform and international events for professionals in 3D printing, additive manufacturing, and their related market applications. of the $12.8 Every month, over 1.2M Every month, over 1.2M

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

Additive Manufacturing

NOVEMBER 3, 2022

You have been involved in additive manufacturing and 3D printing research for some time. Automotive work garnered early attention, and now you’re branching out. There’s a lot of opportunities for additive to really transform a lot of different industries. I think automotive has leaned.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Automotive 52

SMMT

OCTOBER 4, 2022

Last week SMMT and some of our members travelled to Barcelona for a visit programme arranged by HP, to showcase additive manufacturing and how it can be used in automotive. To read more about HP Supply chain and additive manufacturing opportunities in Spain here.

Supply Chain 52

Supply Chain Additive manufacturing 3D printing Manufacturing 52

AU Manufacturing

FEBRUARY 13, 2023

The discovery, whose results were published in the journal Applied Materials Today, is claimed to have extensive implications for the energy sector as well as the aerospace and automotive industries. Members of the Sandia team used a 3D printer to swiftly fuse together metal powders and create a sample of it.

Additive manufacturing 78

Additive manufacturing 3D printing Manufacturing Aerospace 78

Fabricating & Metal Work

JUNE 14, 2023

ADDITIVE MANUFACTURING Liebherr manufactures high-pressure hydraulic valve blocks for Airbus. The adoption of additive capabilities and increasing market competitiveness will only accelerate as we see more industries adopting AM over the near future. Let’s stay in the automotive industry for a moment.

Additive manufacturing 59

Additive manufacturing Manufacturing Computer-Aided Design (CAD) 3D printing 59

Mold Making Technology

FEBRUARY 2, 2023

Photo Credit: Westminster Tool Industry leaders and state officials gathered at Westminster Tool to view the company’s metal 3D printing capabilities, made possible through the Mantle beta machine. Mantle’s Trueshape Technology makes the additive opportunities more accessible to small businesses like Westminster Tool. .

3D printing 52

3D printing Automotive Additive manufacturing Manufacturing 52

Additive Manufacturing

SEPTEMBER 19, 2022

ICYMI: Additive manufacturing news reflected the return of IMTS with big announcements before and during the show. Nikon expanded their additive manufacturing reach with bid to takeover SLM Solutions and investment in Hybrid Manufacturing Technologies. HP announced availability of the Metal Jet S100. READ MORE.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Form 52

AU Manufacturing

FEBRUARY 22, 2023

IperionX has appointed Harold Sears as Additive Manufacturing’s senior advisor, bringing over 32 years of experience in rapid manufacturing technologies, including 29 years in AM. The post IperionX names Harold Sears as senior advisor for additive manufacturing appeared first on Australian Manufacturing.

Additive manufacturing 82

Additive manufacturing Manufacturing Supply Chain Prototype  82

Additive Manufacturing

NOVEMBER 16, 2022

Munich/November 15, 2022 – DyeMansion launched a new Powerfuse S model to smooth 3D-printed polypropylene. The Powerfuse S PP is the first ever green vapor polish solution for highly industrial manufacturing and surface improvements beyond aesthetics to smooth 3D-printed PP.

3D printing 52

3D printing Consumer Goods Additive manufacturing Prototype  52

SMMT

JULY 28, 2022

We are facing a global supply crisis, strongly affecting the automotive sector, hindering its production chains and, therefore, its sales. Thus, we have learned that we must evolve towards more diversified supply chains, where components manufacturing sites are closer to assembly lines and consumer markets. in Southern Europe.

Supply Chain 52

Supply Chain Additive manufacturing 3D printing Manufacturing 52

AU Manufacturing

OCTOBER 16, 2022

SmarTech Analysis ‘ new report, “Additive Manufacturing Post Processing: State of the Market and Looking Ahead,” provides the necessary raw data and analysis for management, investors, users, product planners, and marketers to further their understanding of this critical path in the AM workflow. From the Report.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

Manufacturer's Monthly

AUGUST 2, 2023

As the director of CSIRO’s Lab 22, Australia’s centre for additive innovation, I have witnessed the rapid and impressive growth of the additive manufacturing (AM) industry. Automotive businesses have adopted AM for rapid prototyping and parts manufacturing, expediting the design process.

Additive manufacturing 69

Additive manufacturing Manufacturing Supply Chain Prototype  69

Additive Manufacturing

AUGUST 27, 2022

August 23, 2022 — NUBURU ® has been awarded an AFWERX Small Business Innovation Research (SBIR) Phase II contract to develop a blue laser-based 3D printing solution with area printing technology. CENTENNIAL, Colo./August AFWERX is an innovation arm of the U.S.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

Gary Mintchell

JANUARY 27, 2023

a pioneer of green manufacturing technologies with the first modular digital factory for the automotive industry. Divergent has developed an alternative production process to traditional vehicle manufacturing called DAPS (Divergent Adaptive Production System) that addresses economic and environmental challenges head-on.

3D printing 130

3D printing Manufacturing Discrete manufacturing Automotive 130

Additive Manufacturing

SEPTEMBER 12, 2022

We are in the early stages of a fourth industrial revolution, spearheaded by the accelerated growth of 3D printing and its ability to accelerate designs, improve process developments, and now in an industry first, realize true economies of scale. “We

3D printing 52

3D printing Manufacturing Supply Chain Digital manufacturing 52