Robotics Business Review

JUNE 29, 2024

Source: BMBF/Hans-Joachim Rickel Germany’s leading robotics centers are coming together to establish the Robotics Institute Germany, or RIG. At the AI-Based Robotics 2024 conference in Berlin, Prof. . The RIG project will kick off on July 1, 2024. Also present: ARMAR-7 robot from KIT.

Robotics 125

Robotics Robotics Benchmarking Artificial Intelligence 125

Fastener News Desk

FEBRUARY 8, 2024

The Fastener Distributor Index (FDI) survey for January, 2024. The Fastener Distributor Index (FDI) was developed as a service to the fastener industry by the FCH Sourcing Network in 2012 to be a new benchmark for the fastener industry. The FDI opened the year inching up to 49.7 after December’s disappointing 47.5

Sourcing 64

Sourcing Benchmarking Form Supply Chain 64

Fastener News Desk

JULY 10, 2024

The Fastener Distributor Index (FDI) survey for June, 2024 dipped very slightly but remained in positive territory coming in at 52.1 The Fastener Distributor Index (FDI) was developed as a service to the fastener industry by the FCH Sourcing Network in 2012 to be a new benchmark for the fastener industry. after reading 52.9

Benchmarking 52

Benchmarking Sourcing Form 52

Fastener News Desk

SEPTEMBER 8, 2024

The Fastener Distributor Index (FDI) survey for August, 2024. The Fastener Distributor Index (FDI) was developed as a service to the fastener industry by the FCH Sourcing Network in 2012 to be a new benchmark for the fastener industry. The FDI rebounded to 53.8

Benchmarking 52

Benchmarking Sourcing Form Supply Chain 52

Dinesh Mishra

JULY 17, 2024

Thousands of exhibits and four days of intense product sourcing, networking and learning: The sheet metal working industry is gearing up for their benchmark event, EuroBLECH 2024, presenting the world’s largest selection of sheet metal working technology in one place.

Smart manufacturing 52

Smart manufacturing Form Benchmarking Robotics 52

Fastener News Desk

APRIL 6, 2024

Bigger picture, the index and market conditions continue to climb out of the malaise seen throughout most of 2023, with some lingering sources of uncertainty as participants look to the remainder of 2024, election, labor strikes, port/ocean container issues, etc. Key Points : FDI sees further m/m improvement. February 50.5).

Freight 52

Freight Sourcing Benchmarking Form 52

Robotics Business Review

AUGUST 1, 2024

Source: IDTechEx More than 90% of road traffic accidents happen because of human error, so the importance of autonomy and its potential safety benefits cannot be overlooked. Illustration of the levels of vehicle autonomy based on the definition from the Society of Automotive Engineers. In the U.S., and China in recent years.

Automotive 116

Automotive Benchmarking Sourcing Robotics 116

Robotics Business Review

JANUARY 24, 2024

Source: Waymo Robotaxis have had a bumpy ride in San Francisco since companies first began giving public rides in February 2022. Waymo rolling out robotaxis new cities Waymo announced on January 19, 2024 that it filed paperwork with the CPUC to “extend our driverless deployment service to include LA.”

Robotics 132

Robotics Robotics Benchmarking Sourcing 132

Fastener News Desk

MARCH 15, 2024

The Fastener Distributor Index (FDI) survey for February, 2024. The Fastener Distributor Index (FDI) was developed as a service to the fastener industry by the FCH Sourcing Network in 2012 to be a new benchmark for the fastener industry. 2024 FDI REPORTS: Fastener Distributor Index (FDI) | January 2024

Benchmarking 52

Benchmarking Sourcing Form Supply Chain 52

Robotics Business Review

JUNE 6, 2024

Source: Foxconn Hon Hai Technology Group, better known as Foxconn, this week said they plan to jointly build an advanced computing center in Kaohsiung, Taiwan. The companies made the announcement at Computex 2024. NVIDIA CEO Jensen Huang and Foxconn CEO Young Liu celebrate their cooperation.

Smart manufacturing 113

Smart manufacturing Artificial Intelligence Benchmarking Robotics 113

Fastener News Desk

JULY 17, 2024

IN THE NEWS with Fastener News Desk the Week of July 15, 2024 Hello, fastener enthusiasts and industry professionals we’re LIVE in the FastenerTV studio! The Fastener Distributor Index (FDI) survey for June 2024, dipped very slightly but remained in positive territory coming in at 52.1 1 July 2024 marked the 30th anniversary of Prof.

Benchmarking 52

Benchmarking Sourcing Manufacturing 52

Frost & Sullivan Manufacturing

MAY 2, 2025

Local laws and trade blocs are impacting design strategies, talent distribution, and even the sourcing of materials. Compound semiconductors , silicon photonics, and hybrid material ecosystems are establishing new benchmarks for reliability, size, and power. Want to dive deeper?

Automotive 52

Automotive Electronics Industry 4.0 Industry 4.0 52

i4.0 today

MARCH 5, 2025

Compatibility with mature-node processes has meant that a wide swathe of the foundry market has invested in PIC manufacturing, with TSMC highlighting the technologys importance with its introduction of a 65nm silicon photonics manufacturing process in 2024. Building PICs on a monolithic indium phosphide (InP) platform solves this issue.

Electronics 52

Electronics Benchmarking Sourcing Fit 52

i4.0 today

JULY 30, 2024

Lucidworks , a leader in search and total AI solutions, today released new financial services findings from its second annual Generative AI Global Benchmark Study. Despite this initial excitement, the implementation of planned initiatives in 2024 has been sluggish. 93% last year). Learn more about Lucidworks at Lucidworks.com.

Benchmarking 52

Benchmarking Sourcing Industry 4.0 Industry 4.0 52

Modern Machine Shop

OCTOBER 9, 2024

IMTS 2024 — The International Manufacturing Technology Show ran Sept. Transcript : Julia Hider — Senior Editor Modern Machine Shop's editorial team recently attended IMTS 2024, the largest manufacturing trade show in North America, where we saw all kinds of machining technology. 9-14 in Chicago, Ill.

Robotics 52

Robotics Robotics 3D printing Automation 52

Fastener News Desk

JUNE 24, 2024

IN THE NEWS with Fastener News Desk the Week of June 17, 2024 We’ve got a great episode on tap for you this week with lots to report, loose fasteners, incorrect torquing, fastener acquisitions, and MDM’s 2024 Top Fastener Distributor list, with several industry events happening this week and more!! Just as the Federal Reserve and U.S.

Aerospace 52

Aerospace Supply Chain Cargo Freight 52

Frost & Sullivan Manufacturing

FEBRUARY 3, 2025

For instance, BYD showcased its SEALION 6 model, boasting Super Plug-in Hybrid EV technology (which uses a high-power motor drive and large-capacity power battery as its primary power source). Vehicles like this are setting the stage for stronger hybrid market penetration in India.

Automotive 52

Automotive Value chain Benchmarking Supply Chain 52

Frost & Sullivan Manufacturing

SEPTEMBER 2, 2024

Frost & Sullivan’s Benchmarking System Highlights Leading Companies Poised for Growth and Advancing Healthcare Interoperability San Antonio, 2 September 2024 — The healthcare data interoperability market is expected to reach $19.28 billion by 2028, growing at a compound annual growth rate (CAGR) of 18.3%

Benchmarking 52

Benchmarking Sourcing 52

i4.0 today

MARCH 25, 2024

Wibu-Systems is set to return to Embedded World, scheduled for April 9-11, and will share an exhibition space with OSADL – the Open Source Automation Development Lab, at hall 4, booth 168. The post Trusted Digital Identities, Trusted IP, and Trusted Apps: Wibu-Systems’ Formula for Success at Embedded World 2024 appeared first on i4.0

Electronics 52

Electronics Benchmarking Supply Chain Automation 52

Modern Machine Shop

MAY 27, 2025

Source: Zoller Zoller Inc. Zoller’s most recent competition culminated at IMTS 2024, where Atlas Fibre , based in Northbrook, Illinois, was named the inaugural winner. officially launched the 2026 Toolroom of the Year competition during its Open House and Technology Days events in Ann Arbor, Michigan, and Mississauga, Ontario.

Benchmarking 52

Benchmarking Aerospace Sourcing Manufacturing 52

Robotics Business Review

SEPTEMBER 29, 2024

However, in its 2024 “Tools, Equipment, and Robotics Benchmarking Report,” BuiltWorlds reported that industry attitudes are starting to change. Source: BuiltWorlds The post BuiltWorlds reports that the construction industry may be warming to robotics appeared first on The Robot Report.

Robotics 65

Robotics Robotics Sourcing Benchmarking 65

Modern Machine Shop

JULY 18, 2024

IMTS 2024 offers visitors access to exhibitors with a wide swath of technology to help achieve these goals. ” Making the Most of IMTS 2024 The journey towards automation and digitalization in manufacturing, as exemplified by Major Tool and Multi-Axis Technologies LLC, underscores a transformative shift in the industry.

Aerospace 105

Aerospace Lead Time 3D printing Robotics 105

Frost & Sullivan Manufacturing

SEPTEMBER 12, 2024

Connecting various applications, data sources, smart devices, and storage infrastructure through decentralized computing and edge networks , thereby extending cloud capabilities to edge locations. How Will Robust Competitive Benchmarking Help to Boost Cloud Innovation?

Benchmarking 52

Benchmarking Artificial Intelligence Compliance Automation 52

Canadian Manufacturing

AUGUST 24, 2022

From 2026 onwards, it is envisaged that Rock Tech contributes up to 10,000 tonnes of lithium hydroxide annually to Mercedes-Benz and its battery partners, starting with a qualification period and after quality and sustainability benchmarks have been met.

Supply Chain 59

Supply Chain Benchmarking Sourcing Manufacturing 59

i4.0 today

OCTOBER 26, 2023

IDTechEx’s latest industry report, “ Mobile Robotics in Logistics, Warehousing and Delivery 2024-2044 ”, introduces pilot projects and cities that are united to offer last-mile outdoor autonomous delivery services. The table below briefly summarizes a few key benchmarks. altitude, buildings nearby, etc.),

Robotics 52

Robotics Robotics Warehousing Logistics 52

Dinesh Mishra

MAY 23, 2024

Ensuring a mix of fast and slow chargers, catering to diverse geographic and demographic needs, and incorporating business models such as battery swapping, battery leasing, and integrating renewable energy sources are key steps. Its extension beyond the 2024 deadline is seen as essential for sustaining and accelerating EV growth in India.

Manufacturing 52

Manufacturing Benchmarking Energy Optimization Form 52

Mold Making Technology

AUGUST 8, 2024

economy and moldmaking industry face mixed opportunities and challenges in 2024. Source | Getty Images If you were at the NPE last May in Orlando, Florida, you probably experienced the energy of the plastics industry firsthand. billion dollars in January 2024 to 1,059.3 billion dollars in June 2024. Considering the U.S.

Artificial Intelligence 52

Artificial Intelligence Manufacturing Benchmarking Supply Chain 52

i4.0 today

FEBRUARY 8, 2024

IDTechEx explores this question in their latest report, “ 3D Printing and Additive Manufacturing 2024-2034: Technology and Market Outlook “, and presents some of those trends below. There will be additional consideration of the energy sources used to power energy-intensive printing technologies.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Composites 52

i4.0 today

AUGUST 21, 2024

It is expected that pricing will be subject to market indicators, with mechanisms for increase/decrease tied to certain benchmarks. The offtake tonnages increase over the seven-year term and the average annual tonnage represents a significant percentage of the Company’s annual high-purity manganese product production.

Supply Chain 52

Supply Chain Value chain Benchmarking Sourcing 52

i4.0 today

FEBRUARY 12, 2025

IDTechEx’s new PIC report thoroughly investigates the PIC market and has identified Photonic Transceivers for AI as an emerging segment that will soon be the largest source of demand for PICs. Source: IDTechEx What are the PIC materials of the future? There is a wide variety of future PIC materials.

Sourcing 52

Sourcing Artificial Intelligence Electronics Value chain 52

Fastener News Desk

SEPTEMBER 11, 2023

Product sourcing prices in Taiwan are up 6%, China is slightly down, and containerized freight is down. Beyond the near term, we assume 2024 returns to just modestly above normal seasonality in year one of an industrial recovery. We have lost orders for less than $0.25 Customers are flat and building to order vs. inventory.”

Freight 52

Freight Sourcing Benchmarking Form 52

Frost & Sullivan Manufacturing

MARCH 8, 2024

Hotels in major business hubs such as Chicago, Boston, and San Jose, and other global cities, are expected to experience double-digit price increases for business travelers in 2024. [2] Event automation tools that attach sourcing, contracts, and actuals to the event record can allow for real-time budget vs actual spend analysis.

Benchmarking 59

Benchmarking Beverage Sourcing Automation 59

Frost & Sullivan Manufacturing

AUGUST 28, 2024

This is also prompting charge point operators (CPOs) to experiment with renewable energy sources, though these efforts are still in their early stages. Such regions are expected to witness growth rates ranging from 30% to an astounding 120% for the January 2023 to December 2024 timeframe.

Artificial Intelligence 59

Artificial Intelligence Value chain Benchmarking Supply Chain 59

i4.0 today

DECEMBER 15, 2023

Moreover, Advantech’s Sustainable Development Committee has established two primary objectives: achieving complete reliance on renewable energy sources at all operational sites worldwide by 2040, and attaining net-zero emissions by 2050.

Supply Chain 52

Supply Chain Benchmarking Artificial Intelligence Value chain 52

Fastener News Desk

OCTOBER 27, 2023

didn’t just show up at IFE2023 – they arrived, fully prepared and packaged, setting a new benchmark for excellence! Website: Rivet.com BEST CREATIVITY AWARD – Crossroad Distributor Source The Crossroad Team clinches the Best Creativity Award yet again at IFE2023! Save the dates: September 9-11, 2024!

Benchmarking 52

Benchmarking Sourcing Manufacturing 52

i4.0 today

SEPTEMBER 16, 2024

In turn, this helps train the models for accuracy, promotes trust , and enables humans to correct errors or misinterpretations closer to the source. Kadence International fielded the survey in the spring of 2024. The data was examined based on respondents’ roles, geographical locations, company size, and other factors.

Benchmarking 52

Benchmarking Sourcing Industry 4.0 Industry 4.0 52

Dinesh Mishra

SEPTEMBER 23, 2024

Furthermore, we engage in benchmark projects that allow us to demonstrate the effectiveness of our combined solutions in real-world applications, giving end-users the confidence to invest in advanced technologies.

3D printing 52

3D printing Additive manufacturing Robotics Robotics 52