Brookville Equipment earns ISO 9001:2015 certification
The Fabricator
FEBRUARY 16, 2024
has been certified as compliant with ISO 9001:2015 standards. Brookville Equipment Corp.
This site uses cookies to improve your experience. By viewing our content, you are accepting the use of cookies. To help us insure we adhere to various privacy regulations, please select your country/region of residence. If you do not select a country we will assume you are from the United States. View our privacy policy and terms of use.
The Fabricator
FEBRUARY 16, 2024
has been certified as compliant with ISO 9001:2015 standards. Brookville Equipment Corp.
Fabricating & Metal Work
OCTOBER 24, 2022
the leading industrial abrasive power tool manufacturer announced that the Company has earned ISO 9001:2015 certification for its quality management system. ISO 9001:2015 is a globally recognized quality management standard developed and published by the International Organization for Standardization (ISO). Dynabrade, Inc.,
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fastener News Desk
JULY 10, 2024
The program ran in 2014 & 2015 and then it was put on pause as so many young fastener professionals had been recognized in those two years. Candidly, there were only so many young people entering the fastener industry and they feared that by running the program again they would run out of worthy candidates.
The Fabricator
FEBRUARY 19, 2024
Nitro Cutting has announced its certification to ISO 9001:2015 for quality management systems.
The Fabricator
JUNE 22, 2023
has obtained ISO 9001:2015 certification of its quality management system. CO2Meter.com, a source of gas detection technology in Ormond Beach, Fla.,
Fabricating & Metal Work
JANUARY 26, 2024
Millerbernd Manufacturing Company, a leading fabricator of light and traffic structures, rolled rings and cylinders, and airfield ground lighting products, announced its Ring & Cylinder division has been ISO 9001:2015 certified from Perry Johnson Registrars, Inc.
The Fabricator
JANUARY 16, 2024
has announced that its RingandCylinder division has been ISO 9001:2015 certified. Winsted, Minn.-based based Millerbernd Manufacturing Co.
The Fabricator
AUGUST 8, 2022
has been approved for renewal of its ISO 9001:2015 certification. Direct Metals, an international steel service center with locations in Kennesaw, Ga., and Waukegan, Ill.,
The Fabricator
OCTOBER 24, 2022
has earned ISO 9001:2015 certification for its quality management system. Power tool manufacturer Dynabrade Inc., Clarence, N.Y.,
Manufacturing Tomorrow
AUGUST 11, 2023
Aerosport is very proud to announce that we have recently earned our ISO 9001:2015 certification.
Manufacturing Tomorrow
DECEMBER 21, 2022
The company is pleased to announce that it has now passed Stage 2 of the ISO 9001:2015 standard audit with ZERO findings, after completing Stage 1 earlier in the year.
Trimantec
AUGUST 27, 2019
August 27, 2019—Trimantec, a specialist in providing manufacturing solutions, announces they are ISO 9001:2015 Quality Management System (QMS) certified. To better serve customers, Trimantec has embraced the standards of the ISO 9001:2015 QMS. Features and benefits of ISO 9001:2015 QMS certification include: Increased efficiencies.
Canadian Manufacturing
AUGUST 26, 2022
announced the successful recertification of its ISO 9001:2015 Quality Standard Accreditation. MISSISSAUGA — Cargojet Inc. Cargojet says they are the only air cargo carrier in Canada with this accreditation.
Design World
NOVEMBER 9, 2023
company, completed and passed its recertification AS9100:D and ISO 9001:2015 quality system audit. Stock Drive Products/Sterling Instrument (SDP/SI), a Designatronics, Inc. The audit, conducted by Intertek over a 5-day period, certifies SDP/SI’s quality management system conforms to AS and ISO standards.
Design World
JANUARY 10, 2024
Nowak began volunteering for PTDA in 2015, serving on the Education & Training Committee. The recently elected 2024 Board of Directors and Manufacturer Council of the Power Transmission Distributors Association (PTDA) begin their leadership terms. Since then,… The post Brian Nowak and Andrew A.O.
Manufacturer's Monthly
JULY 16, 2024
In 2015, Queensland established a 50 per cent renewable energy target by 2030. Queensland is accelerating towards its renewable energy targets and now boasts 54 large-scale renewable energy projects since 2015. In 2022, this target was increased to 70 per cent by 2032, and 80 per cent by 2035.
Design World
JULY 18, 2023
Eagle Stainless Tube & Fabrication, a small-diameter stainless steel tubing supplier, is proud to announce the successful renewal of its ISO 13485:2016 and ISO 9001:2015 quality management certifications. Eagle has been maintaining ISO quality certifications since 1998, spanning 25 years!
MRPEasy
MAY 28, 2024
In 2015, a few experienced engineers from a reputable technology consultancy firm decided to go it alone and design a novel radar system. They engineered a prototype using, in part, an ordinary tea-tray. The finished product surpassed expectations and landed the team a contract with the UK Ministry of Defense.
Canadian Manufacturing
SEPTEMBER 27, 2023
Affected Kia models include the 2010 through 2019 Borrego, the 2014 to 2016 Cadenza, 2010 through 2013 Forte, Forte Koup and Sportage, the 2015 to 2018 K900, the 2011 to 2015 Optima, the 2011 to 2013 Optima Hybrid and Soul, the 2012 to 2017 Rio, the 2011 to 2014 Sorento, and the 2010 to 2011 Rondo.
The Fabricator
MAY 14, 2024
has received ISO 9001:2015 and AS9100D certifications in recognition of its quality management systems. EMJD Precision Fabrication, Englewood, Colo.,
Robotics Automation News
SEPTEMBER 28, 2023
All the way back in 2015, when drones were far less readily available, easyJet pioneered the use of the Remote Intelligent Survey Equipment for Radiation or RISER drone […]
Chris Hohmann
SEPTEMBER 9, 2022
While flipping through a vintage (2015-2016) Harvard Business Review (printed) magazine, I was struck by the article “Why Strategy Execution Unravels—and What to Do About It” by Donald Sull, Rebecca Homkes, and Charles Sull.
Canadian Manufacturing
JULY 8, 2024
Prior to joining CAE in 2015, she worked in senior and executive roles in Public Affairs, Communications and Corporate Social Responsibility in the mining industry (Noranda/Falconbridge) and in manufacturing (Bombardier Transportation and Bombardier Aerospace). Gagnon holds two law degrees from McGill University Law School (B.C.L.
Manufacturer's Monthly
JUNE 11, 2024
Image: CAPS Australia CAPS Australia is proud to announce its recent ISO certifications in Occupational Health and Safety Management Systems (ISO 45001:2018) and Environmental Management Systems (ISO 14001:2015) for its Perth and Sydney branches.
Gary Mintchell
FEBRUARY 16, 2024
Two major sources of technology buzz from around 2015 to 2020 or so found homes in industry consortia within The Object Management Group. I talked often with people from the IIC, aka Industry IoT Consortium , and with the Digital Twin Consortium. These were most likely too much overhead for the supporting suppliers and industry.
Plastics Today
APRIL 23, 2024
A look back at a 2015 study that explored albumin from the egg white of a hen as a potential alternative for antibacterial bioplastics. The researchers had envisioned the albumin-based material having broad applications in medtech.
Robotics Automation News
MAY 21, 2024
OSHA estimates that from 2015 to 2022 alone, over 2,101 offshore workers were severely injured due to work-related procedures. With the level of workplace hazards in the offshore industry, it’s only reasonable to optimize areas that pose a huge risk to OGE workers.
Cisco Smart Manufacturing
JUNE 1, 2023
As with all 17 UN Sustainable Development Goals adopted in 2015, number 5— Achieve gender equality and empower all women and girls —is an objectively fair aspiration. The trouble with a goal, however, i… Read more on Cisco Blogs
Fabricating & Metal Work
JANUARY 24, 2024
The Guill high quality standards are evidenced by the company’s many certifications, including ISO 9001:2015. Besides being experts in extrusion tooling, Guill is a major industrial manufacturer who can provide customers with one-stop shopping for their tooling and other select machine shop needs.
Design World
AUGUST 8, 2022
In 2015, the company opened a parts side–Midwest Industrial Supplies. The Power Transmission Distributors Association (PTDA), the leading association for the industrial power transmission/motion control (PT/MC) distribution channel, has welcomed a new member company. MEM Industrial, LLC (Wichita, Kan.) Today, MEM is the largest U.S.
E&T
OCTOBER 31, 2023
ULEZ was originally announced under the previous mayor Boris Johnson in March 2015 with a proposed introduction in September 2020. charge applies 24 hours a day and applies to most petrol cars made before 2006, most diesel cars manufactured prior to 2015 and most motorcycles made before 2007.
Automation Mag
JUNE 21, 2024
RoboDK was founded in Canada in 2015 and specializes in offline programming and simulation. The integration of KEBA Robotik KeMotion in RoboDK will reportedly simplify the complete life cycle of a process solution with integrated robotics, from the preparation of the quotation to implementation and after-sales support.
WMEP
AUGUST 4, 2023
After eight years of living under the quality requirements of ISO 9001:2015, ISO has finally obtained approval to revise the ISO 9001 quality standard. The approval process was quite contentious, with five previous ballots to revise the 2015 version not approved.
The Fabricator
DECEMBER 17, 2022
Lexicon Fabrication Group’s dive into robotic welding in 2015 spurred a virtuous cycle of growth. Automation opened up more opportunities, which in turn pushed hiring into high gear.
Robotics Automation News
JULY 15, 2022
Doosan Robotics was founded in South Korea in 2015 and following three years of research and development they developed a range of four cobot models that use their […].
SMMT
AUGUST 31, 2023
8,853 units produced in best July since 2015, while year to date output soars 68.0% The result means the industry enjoyed its busiest July since 2015, while year to date production is up by 68.0% Commercial vehicle output rises 9.3% in fourth consecutive month of growth. above pre-pandemic volumes. on pre-pandemic levels.
Robotics Automation News
APRIL 25, 2024
This achievement illustrates the rapid adoption of the Exotec technology since its founding in 2015 as it continually expands its headcount, reinvests into new solutions and reaches new markets […]
E&T
FEBRUARY 1, 2023
From 2015 to 2021, the impact of winter heating on China’s capital Beijing and 27 other cities saw concentrations of fine particulate matter (PM2.5) µg m-3 in 2015. in mainland China to reduce significantly between 2015 and 2021, with significant public health benefits.” from heating activities reduce by 41.3
Canadian Manufacturing
JULY 19, 2024
He was first elected in the 2015 contest that swept Trudeau’s Liberals into power. Previously, MacKinnon served as the Liberals’ chief whip in the House of Commons. And throughout the COVID-19 pandemic, he served as a parliamentary secretary in the crucial procurement portfolio.
The Fabricator
JULY 21, 2023
has received renewal of its ISO 13485:2016 and ISO 9001:2015 quality management certifications. Eagle Stainless TubeandFabrication, a supplier of small-diameter stainless steel tubing located in Franklin, Mass.,
Plastics News
MAY 15, 2023
Ferrer Borrell published his first article in 2015 and founded Gau3di, a metal additive manufacturing startup, in 2020.
The Fabricator
JANUARY 30, 2023
an ISO 9001:2015-certified tool and die manufacturer offering die design and construction with tryout and short-run stamping capabilities. Springfield, Ohio-based Tool Tech LLC has announced the acquisition of Cameron Tool Corp. in Lansing, Mich.,
Automation Mag
NOVEMBER 13, 2023
The company’s product portfolio includes both general-purpose and high-tech specialty products manufactured to ISO 9001-2015 standards and backed by 58 years of experience.
MEM
SEPTEMBER 21, 2023
Wells Plastics is ISO 9001 (2015), ISO 14001 (2015) Gold EcoVadis and JOSCAR certified. Website The post Wells Plastics, Specialist Additive Masterbatch and Compound Manufacturer appeared first on Manufacturing & Engineering.
Expert insights. Personalized for you.
We have resent the email to
Are you sure you want to cancel your subscriptions?
Let's personalize your content