Robotics Business Review

JANUARY 17, 2024

Source: Locus Robotics Even the most successful mobile robot vendors are adjusting expectations and staffing levels in reaction to slowing post-pandemic growth. ” Founded in 2014, Locus Robotics provides autonomous mobile robots ( AMRs ) that collaborate with human pickers to increase warehouse efficiency. . Locus Robotics Corp.

Robotics 105

Robotics Robotics Logistics Supply Chain 105

Robotics Business Review

JANUARY 6, 2024

Source: CMR Surgical CMR Surgical Ltd. Founded in 2014, CMR Surgical said it closed the year with its Versius global install base more than 50% higher than in 2022. Versius surgical robotics systems. this week announced that it closed 2023 with a record number of Versius surgical robot installations in one quarter. The Cambridge, U.K.-based

Robotics 71

Robotics Robotics Sourcing 71

Robotics Business Review

JANUARY 11, 2024

Source: 1X Technologies Humanoids and artificial intelligence were the top stories in robotics last year, and that trend is continuing. Founded in 2014, 1X said its goal is to produce safe systems that benefit society and meet global labor demand at a commercial scale. NEO is designed for household and other service uses.

Robotics 98

Robotics Robotics Artificial Intelligence Sourcing 98

E&T

NOVEMBER 10, 2023

The image reveals a wealth of details never seen before, such as a bounty of galaxies outside the cluster and a sprinkling of sources that vary over time. This cluster was the first of a set of unprecedented, super-deep views of the universe from an ambitious, collaborative Hubble program called Frontier Fields , inaugurated in 2014.

Form 97

Form Sourcing 97

Canadian Manufacturing

AUGUST 23, 2022

As long-time collaborators, AirAsia and CAE have worked together since 2014 on pilot training at CAE network training centers. This new training system compares independent sources to provide increased confidence in grading data quality.

Compliance 52

Compliance Sourcing Aerospace Manufacturing 52

Additive Manufacturing

APRIL 28, 2023

NYSE: JBL) today introduced PLA 3110P, a novel powder based on a renewably sourced biomaterial that offers a bio-based alternative to petrochemical-based powders, such as Nylon-12 (PA 12). PA-12 data source: Life cycle assessment of a PA12 powder material for additive manufacturing, Fraunhofer Institute, November 7, 2022.

Prototype  52

Prototype  Additive manufacturing Sourcing Supply Chain 52

Fastener News Desk

NOVEMBER 9, 2022

Jonathan joined ZAGO in 2014 operating machines to produce sealing screws, before working his way up. SOURCE: Go to: [link]. . “At ZAGO, I can be a mother while continuing to grow my career. ZAGO even paid my college tuition.” ” Jonathan Cruz , Lead Machinist and Robot Specialist, Honduras.

Sourcing 52

Sourcing Robotics Robotics Manufacturing 52

Canadian Manufacturing

APRIL 12, 2023

While the CRA’s overall grade hasn’t changed since the last two report cards in 2014 and 2017, three in ten (31%) businesses and 76% of tax practitioners think CRA’s service got worse in the last three years.

Sourcing 40

Sourcing Compliance Manufacturing 40

E&T

DECEMBER 9, 2022

RR: A lightbulb switched on for me after attending The British Grand Prix in 2014. Over the years, I had always enjoyed karting with my dad, and my grandad has always been a source of inspiration to me, as a mechanical engineer working on nuclear power stations. SS: Why were you interested in motorsports?

Fit 97

Fit Automotive Composites Form 97

AU Manufacturing

DECEMBER 12, 2022

The finding was derived from a survey of an independent panel of 210 owners and senior decision-makers of Australian SMEs by Money Transfer Comparison , a comparison website that enables Australian individuals and businesses to source the best money transfer providers and rates.

Supply Chain 77

Supply Chain Sourcing Manufacturing Form 77

Frost & Sullivan Manufacturing

AUGUST 24, 2023

Juvo is a trendsetting fintech company established in 2014 that leverages its highly differentiated identity and credit scoring solutions to establish financial identities and support inclusive credit services in various Latin American countries, such as Brazil, Paraguay, Bolivia, Colombia, El Salvador, Guatemala, and Honduras.

Function 52

Function Sourcing 52

Fastener News Desk

APRIL 25, 2023

The historical period of 2014 to 2021 witnessed impressive growth in the digital commerce platform market with a surging CAGR of 12.2%. Content source: B2B eCommerce Association The market is anticipated to rise at a CAGR of 12.6% from 2022 to 2029.

Sourcing 52

Sourcing Manufacturing 52

Additive Manufacturing

OCTOBER 24, 2022

RAPID, May 2014). Another potential source of concern from regulatory bodies is inspection techniques for complex structures. In fact, according to FDA’s analysis of medical device clearances, additive manufacturing has been used in medical device production as early as 2008 (Ricles, L & Oh, S.

Additive manufacturing 74

Additive manufacturing Manufacturing Quality Management System Sourcing 74

Manufacturer's Monthly

AUGUST 9, 2023

The Markforged story began in 2013 with years of research and development, culminating in a milestone achievement in 2014 when the company unveiled the world’s first 3D printer capable of printing in continuous carbon fibre. This advancement opened new possibilities for manufacturing stronger and more resilient parts.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

Canadian Manufacturing

SEPTEMBER 28, 2023

By 2014, Kenya was getting half of its onions from its neighbor, according to a U.N. This sent prices in neighboring Bangladesh soaring, and authorities are scrambling to find new sources for the vegetable. Plus, people preferred red onions from Tanzania because they were cheaper and lasted longer. Food Agriculture Organization report.

Food Production 74

Food Production Sourcing Manufacturing 74

E&T

SEPTEMBER 27, 2023

Her team works around the clock to crunch data from dozens of screens and sources, but the real eyes and ears of this far-reaching system are the people who live in danger zones around Medellín. In 2014, the area even received a hefty dose of Saharan dust.

Sourcing 118

Sourcing 118

Automation Mag

AUGUST 10, 2022

A 2014 attack on a German steel mill illustrated this when a blast furnace was prevented from shutting down safely leading to severe equipment damage and loss of containment 3. . In addition, to identify an appropriate risk assessment method, it is also important to identify major potential sources of risk to automated manufacturing systems.

Automation 52

Automation Supply Chain Industry 4.0 Industry 4.0 52

i4.0 today

DECEMBER 7, 2022

Farmers can command silos to release food, open gates or manage irrigation systems, without any need for expensive and often hard-to-source human interaction. Founded in 2014 by a renowned team of experts, Astrocast develops and tests all its products in-house, from the satellites to the modules.

Sourcing 52

Sourcing Industry 4.0 Industry 4.0 52

Fastener News Desk

OCTOBER 27, 2023

Since its inception in 2014, the Best Booth Awards have served as a testament to the creativity, branding, and design prowess of exhibitors. Website: Rivet.com BEST CREATIVITY AWARD – Crossroad Distributor Source The Crossroad Team clinches the Best Creativity Award yet again at IFE2023!

Benchmarking 52

Benchmarking Sourcing Manufacturing 52

E&T

SEPTEMBER 7, 2022

Market regulator Securities and Exchange Board of India (SEBI), in compliance with the Companies Act 2013, made it compulsory to have at least one woman on a board from October 2014. While building an inclusive workplace, it’s also essential to source a diverse pipeline. Then spotting talent may be an art and an exercise as well.

Composites 40

Composites Compliance Fit Form 40

MEM

DECEMBER 15, 2022

Fajer Mushtaq, during her doctoral research at ETH Zurich that commenced in 2014. Together with Dr. Silvan Staufert, the concept of a novel catalyst for micropollutant degradation was built into a scalable technology platform that is able to address the problem where it matters: at the source, before they enter waterways.

Pharmaceutical 52

Pharmaceutical Consumer Goods Value chain Sourcing 52

Plastics News

NOVEMBER 8, 2022

Many have eyed hydrogen's tantalizing potential as an abundant and pollution-free energy source for transportation and beyond. Jules Verne described a method in which "water will one day be employed as fuel," and wrote hydrogen and oxygen will "furnish an exhaustible source of heat and light" in his 1874 novel The Mysterious Island.

Cargo 52

Cargo Sourcing Fit Freight 52

Control Engineering

FEBRUARY 20, 2023

From 2014 to 2021, the U.S. Sources: (1) The State of Industrial Automation Markets Headed into 2023 (Interact Analysis and Association for Advancing Automation) (2) The Latest Automation Statistics, Trends & Key Market Drivers (2023 A3 Business Forum Report) (3) 2022 McKinsey Global Industrial Robotics Survey (4) Wiek, Hilary.

Automation 52

Automation Bottleneck Supply Chain Robotics 52

Robotics Business Review

MAY 2, 2024

Source: CapSen Robotics CapSen Robotics this week introduced the Version 2.0 Glover and Mark Schnepf founded the company in 2014. CapSen PiC 2.0 combines 3D vision, motion planning, and control algorithms into a single platform. release of its CapSen PiC software. Learn from Agility Robotics, Amazon, Disney, Teradyne and many more.

Robotics 64

Robotics Robotics Control Algorithm Artificial Intelligence 64

E&T

SEPTEMBER 11, 2023

The fund was set up during COP15, becoming the largest global fund dedicated to channelling money needed by poor states to meet their targets to reduce carbon emissions and develop cleaner energy sources. “The It also doubles the initial grant made to help establish the fund in 2014, the government said. The pledge represents a 12.7

Sourcing 116

Sourcing 116

E&T

OCTOBER 17, 2022

A 2014 UK government report warned that competing IoT standards are a major block to growth in the sector: “Left unchecked, this carries a risk of restrictive standards being set and enforced by monopolistic providers, and of fragmentation inhibiting the interoperability of devices.”. “So,

Form 75

Form Fit Function Sourcing 75

Robotics Business Review

FEBRUARY 7, 2024

Source: Starship Technologies Starship Technologies raised $90 million in funding for its delivery robots. million since it started in 2014, per Crunchbase. Starship’s delivery robots travel 4 MPH to deliver goods over short distances. With this latest round, Starship Technologies has raised a total of $287.7

Robotics 101

Robotics Robotics Logistics Sourcing 101

Fastener News Desk

APRIL 18, 2023

The partnership has been in place since 2014 and includes branding on the team’s race cars, driver uniforms, and team equipment. .” Photo credit: Würth Würth Industry has invested in a variety of sports sponsorships, including: NASCAR : Würth is a primary sponsor for the Richard Childress Racing team in NASCAR’s Cup Series.

Supply Chain 69

Supply Chain Fit Warehousing Manufacturing 69

E&T

MARCH 15, 2023

China made it clear it was attempting to step up the pace of its technological development in 2014, announcing a plan to move as fast as possible to finFET technology at the 14nm node. A succession of five-year plans called for more locally sourced chips but with limited success. Overall, Korea’s total exports rose 6.1

Sourcing 104

Sourcing Artificial Intelligence Electronics Supply Chain 104

E&T

MARCH 13, 2023

For example, Dr Sven Daniel Wolfe, a geographer at the University of Zurich, explains that organisers claimed they’d used sustainably sourced timber to build many of the stadia. From an ecological perspective, Sochi 2014 was the worst-scoring winter games, while Beijing 2008 was the worst-performing summer spectacle.

Benchmarking 105

Benchmarking Sourcing Logistics 105

Manufacturer's Monthly

JULY 25, 2023

This not only reduces the maintenance requirements for the coupling but also helps eliminate potential sources of contamination in the processing equipment.” “The elastomeric element used in the Timken Quick-Flex® coupling is pre-lubricated at the factory, which eliminates the need for additional lubrication during operation.

Sourcing 98

Sourcing Composites Manufacturing 98

Control Engineering

APRIL 29, 2023

Since 2014, growth has been exponential, with 18.4 Thus, the figures are based on very reliable sources and they are determined very conservatively: there are probably significantly more EtherCAT devices.” Excluding modular I/O devices, ETG counts 59.1 million nodes, with recent growth being particularly impressive. million.

Sourcing 52

Sourcing Automation Manufacturing 52

Fabricating & Metal Work

APRIL 11, 2023

The company was founded in 1898 in Nagoya, Japan, and is the industry’s only single-source provider of CNC machines, drives, motors, encoders, spindles and automation systems, all manufactured by Okuma. The company designs its own  CNC controls  to integrate seamlessly with each machine tool’s functionality.

Automation 52

Automation Function Sourcing Manufacturing 52

E&T

FEBRUARY 6, 2023

The gas pipeline network has grown from 14,000km in 2014 to the present 22,000km. This indoor solar cooking solution works on both solar and auxiliary energy sources simultaneously. India has the world’s 14th largest refinery capacity. In the next four-five years, the goal is to achieve 35,000 km,” explained Modi.

Supply Chain 52

Supply Chain Sourcing Logistics Form 52

Canadian Manufacturing

JUNE 22, 2023

Founded in 2014 by Alexandre Leclerc and Antoine Bisson – the company has customers in 55 countries which include brands such as Nestlé, Tetra Pak, Mars, Bosch, RioTinto, Coty, Alcoa, Hitachi Energy, Mahle, and more. At the heart of this renewed focus is the need to empower their own employees making the Connected Worker a key focus.

Industry 4.0 40

Industry 4.0 Industry 4.0 Supply Chain Sourcing 40

Fabricating & Metal Work

APRIL 11, 2023

The company was founded in 1898 in Nagoya, Japan, and is the industry’s only single-source provider of CNC machines, controls, drives, motors, encoders, spindles and automation systems, all manufactured by Okuma. The company designs its own  CNC controls  to integrate seamlessly with each machine tool’s functionality.

Automation 52

Automation Manufacturing Smart manufacturing Function 52

E&T

MAY 5, 2023

Overall, the Crown Estate has awarded lease rights for wind farms totalling 41GW, almost 12GW of which is already operational, accounting for the largest source of renewable electricity in the UK, according to estate officials.

Sourcing 111

Sourcing Form 111