Plastics News

JULY 31, 2023

I also travel to clients and offer guidance of how that particular product fits in in different end-use applications in flexible and rigid packaging spaces. Ongayi received two industrial awards from the American Chemical Society: the Young Investigator Award in 2013 and Heroes of Chemistry Award in 2014.

Value chain 75

Value chain Fit Manufacturing 75

Manufacturer's Monthly

FEBRUARY 15, 2024

HOOB was founded in 2014 by two engineers, Tanel Sildnik and Priit Raid. That makes our job of fitting the components into our design so much easier.” When the Estonian company HOOB was asked to build a new assembly line for a global company, they looked to LINAK to meet the ergonomic goals of the project.

Assembly Line 92

Assembly Line Lean manufacturing Bottleneck Automation 92

SMMT

AUGUST 11, 2022

The new 20,000ft 2 premises in Castleford will be used to fit out, commission and support new and used Yutong fully electric passenger vehicles, quadrupling the capacity of Pelican’s UK base. Pelican Engineering has begun work on its new Yutong Bus showroom and workshop facility in West Yorkshire.

Fit 52

Fit 52

i4.0 today

MAY 24, 2023

After spending a number of years in the Factory Automation division, he became General Manager for the Irish office, governing the Living Environmental Systems (LES) and Factory Automation (FA) division in 2014. Since then, he has led the Branch through an accelerated growth phase.

Electronics 52

Electronics Fit Automation Manufacturing 52

E&T

OCTOBER 16, 2023

Despite a modest uptick in numbers last year, engineering-related apprenticeship starts in England are still 9 per cent lower than in 2014/15. The inquiry makes key recommendations to the government including: Ensuring that the secondary school system is “fit for the future” with parity between technical and academic pathways.

Fit 59

Fit Function Manufacturing 59

Marshall Wolf Automation

FEBRUARY 9, 2024

I would say that our logo fit right in with the times! 2014 As graphic design technology evolved, our Wolf came into focus! 80’s-90’s Established in 1984, Hans Wolf started a rep company called Marshall Wolf Associates which evolved into Marshall Wolf Automation, Inc.

Fit 52

Fit Automation 52

SMMT

JULY 25, 2024

Launched in 2014, the Streetdeck is one of the most popular double decker buses in service in the UK, with many thousands of vehicles in operation across the country by the UK’s biggest fleets. What about Equipmake’s new partnership with bus manufacturer Wrightbus?

Logistics 59

Logistics Fit Manufacturing 59

E&T

OCTOBER 14, 2022

Unlike the US, the UK introduced computing for kids from primary through to secondary school in 2014 – but there are still substantial challenges to overcome. So, what’s the state of digital education in the UK, and how can we improve it? The UK curriculum has already made steps in the right direction. Diversity is a key issue.

Benchmarking 85

Benchmarking Fit 85

Robotics Business Review

FEBRUARY 8, 2024

They re-connected in 2014 to co-found Owl Labs, which makes 360° video conferencing devices. It is also adjustable to fit a variety of hand sizes. The autonomous mowers can fit three across in a truck bed, and a robotic service makes more sense than do-it-yourself consumer robots or trying to sell to commercial providers, Thakur said.

Apparel 120

Apparel Robotics Robotics Prototype  120

Dinesh Mishra

FEBRUARY 25, 2024

Physically demanding workplaces in industry can thus be made fit for the future. Its roots lie in a university research project at Helmut Schmidt University, which has been researching exoskeletons since 2014. The S700 from the Hamburg-based company exoIQ effectively relieves arm, neck and shoulder muscles with up to 5kg per arm.

Fit 52

Fit Form Robotics Robotics 52

Manufacturer's Monthly

AUGUST 9, 2023

The Markforged story began in 2013 with years of research and development, culminating in a milestone achievement in 2014 when the company unveiled the world’s first 3D printer capable of printing in continuous carbon fibre. Markforged’s FX20 3D printer proved to be the perfect fit.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

Manufacturer's Monthly

AUGUST 17, 2023

The expansion includes the construction of a new workshop, fit out with new machinery and technology, a retail and office space, and the external development of the premises including landscaping, fencing and signage. Minister for Regional Development Harriet Shing spoke about the announcement. “We

Manufacturing 52

Manufacturing Fit Composites 52

SMMT

MARCH 28, 2024

We’ve made huge strides in producing safer vehicles and safer roads – but the attitudes, health, fitness and alertness of the driver are key ingredients in safety. The NH Fatality Research Database contains details of 1,000 fatal collisions on the Strategic Road Netword since 2014.

Automotive 52

Automotive Fit Supply Chain Manufacturing 52

E&T

MARCH 15, 2023

Candela’s story starts back in 2014, when founder and CEO Gustav Hasselskog calculated that his 28ft power boat (8.5m, but boats are usually measured in feet) used 15 times more fuel than a car for an equivalent distance travelled. The only checks needed are on exposed wiring, which can be protected with regular cleaning after use.

Prototype  105

Prototype  Fit Automotive Sourcing 105

Control Engineering

JANUARY 13, 2023

Top 5 VFD parameter changes explained, 2020: Programming variable frequency drives (VFDs) to fit most industrial applications require only the most basic settings to operate the motor. Understand these 5 VFD parameter changes to optimize VFD programming to fit most motor-drive applications.

Automation 52

Automation Fit Function Electronics 52

Canadian Manufacturing

MARCH 1, 2023

During his tenure at Sparta, John saw them through two transactions: one in 2014 to Thoma Bravo and another in 2017 to New Mountain Capital. Prior to that he spent seven years at Sparta Systems where he ultimately served as the President, leading sales, professional services, customer success and marketing. ” . ”

Fit 40

Fit Electronics Advanced manufacturing Manufacturing 40

E&T

JANUARY 17, 2023

She began working at the Science Museum in 2014 and has gone on to set up her own production company. IT was always the correct fit for me but due to lack of understanding of school guidance counsellors I was pushed towards a more conventional industry that was better understood.”. It was only at university that she found inspiration.

Prototype  124

Prototype  Fit Electronics Manufacturing 124

Fastener News Desk

AUGUST 21, 2024

4618 (2014), No. Tune in at FullyThreaded.com Don’t miss the Don’t miss the FTR SPECIAL REPORT: Chiracosta Wins Form Fit & Function Award / FSTNR Week ’24! Manufactures and distributes fasteners that are used with industrial applications. Also provides consulting services to these companies so they can reduce costs. (No.

Beverage 52

Beverage Fit Cargo Form 52

Control Engineering

APRIL 2, 2023

Courtesy: FarmWise, MIT Finding a road to impact Boyer came to MIT in 2014 and earned masters’ degrees in technology and policy as well as electrical engineering and computer science over the next two years. FarmWise, a start-up co-founded by Sebastien Boyer, is giving farmers a third option.

Robotics 52

Robotics Robotics Artificial Intelligence Fit 52

E&T

SEPTEMBER 7, 2022

Market regulator Securities and Exchange Board of India (SEBI), in compliance with the Companies Act 2013, made it compulsory to have at least one woman on a board from October 2014. It’s also worthwhile to be visible in public domains and on social media. Networking is a means of getting through to boardrooms.

Composites 40

Composites Compliance Fit Form 40

E&T

OCTOBER 17, 2022

A 2014 UK government report warned that competing IoT standards are a major block to growth in the sector: “Left unchecked, this carries a risk of restrictive standards being set and enforced by monopolistic providers, and of fragmentation inhibiting the interoperability of devices.”.

Form 75

Form Fit Function Sourcing 75

Fastener News Desk

APRIL 18, 2023

The partnership has been in place since 2014 and includes branding on the team’s race cars, driver uniforms, and team equipment. Photo credit: Packer Fastener “Sponsoring Brandan just seemed like a great fit for us,” said Terry Albrecht, president of Packer Fastener.

Supply Chain 69

Supply Chain Fit Warehousing Manufacturing 69

Dinesh Mishra

JULY 24, 2023

TSMC is a fitting example. In 2014, Quest Manufacturing rebranded to Aequs. A model that comes to mind is that of TSMC, which started at the right time, worked with renowned brands, and has become a dominant semiconductor industry manufacturer. It is a contract manufacturer producing semiconductors, a technologically advanced field.

Aerospace 95

Aerospace Supply Chain Logistics Manufacturing 95

Dinesh Mishra

JUNE 25, 2024

TSMC is a fitting example. In 2014, Quest Manufacturing rebranded to Aequs. A model that comes to mind is that of TSMC, which started at the right time, worked with renowned brands, and has become a dominant semiconductor industry manufacturer. It is a contract manufacturer producing semiconductors, a technologically advanced field.

Aerospace 40

Aerospace Manufacturing Logistics Consumer Goods 40

Modern Machine Shop

JANUARY 23, 2023

We need to make sure that everything fits. So starting in the Eevee space, started about 2014. He lived there. His whole family lived there. And we said, hey, we need these parts tomorrow, because we got a bunch of parts coming in. And he's like, okay. He's like, they'll be done for like, 4:30am. It's like 2:30am.

Sourcing 98

Sourcing Supply Chain Manufacturing 3D printing 98

Modern Machine Shop

MAY 19, 2024

Phase 1: 2014-2015 Shown here is the first automation unit Cavalier installed with a Hermle C42 U five-axis CNC and five Hermle PW850 pallets, plus a two-axis pallet changer/shuttle. This multistation system enabled the team to cut faster, reduce setups and shorten time between the end of one job and the start of the next.

Automation 52

Automation Robotics Robotics Manufacturing 52

Mold Making Technology

FEBRUARY 29, 2024

Phase 1: 2014-2015 Shown here is the first automation unit Cavalier installed with a Hermle C42 U five-axis CNC and five Hermle PW850 pallets, plus a two-axis pallet changer/shuttle. This multi-station system enabled the team to cut faster, reduce setups and shorten time between the end of one job and the start of the next.

Automation 52

Automation Robotics Robotics Manufacturing 52

MEM

JULY 21, 2023

In addition, the brand is once again offering a limited edition of its flagship Rush+ Small safety eyewear model: the glasses are fitted with pink temples. Used in all environments, and particularly in industry, this model, created in 2014, is one of the brand’s top 3 best sellers.

Manufacturing 52

Manufacturing Fit 52

E&T

MAY 15, 2023

The 1950s saw the introduction of radial tyres, direct-injection engines and disc brakes, while the big breakthroughs of the 1960s were quartz iodine headlamps (followed by LED in 2011 and laser in 2014), gas turbine engines and downforce spoilers. Despite starting last, he went on to take the chequered flag in first place.

Automotive 59

Automotive Fit Prototype  Form 59

Plastics News

NOVEMBER 8, 2022

First step: Tackle trucking Rail and shipping are natural fits for hydrogen fuel cells, experts say. Where hydrogen fits in ground transportation is less certain. The funds also support development of GM Hydrotec fuel cells for trucks, trains and aircraft. Long-haul trucking holds potential. transportation fuel, according to the EPA.

Cargo 52

Cargo Sourcing Fit Freight 52

Manufacturer's Monthly

NOVEMBER 21, 2023

In that spirit, we launched the Rapid Automated Materials and Processing (RAMP) Centre in Melbourne in 2014, to demonstrate how these tools could accelerate advanced materials and chemical science research and development (R&D). CSIRO was an early believer in the transformative power of robotics and automation in research laboratories.

Robotics 52

Robotics Robotics Automation Aerospace 52

Robotics Business Review

JANUARY 27, 2025

” Founded as Halodi Robotics in 2014, 1X Technologies has offices in Moss, Norway, and Sunnyvale, Calif. BMW Group had tested Figure 02 for handling fitted sheet-metal parts on its automotive production line. Having Christoph join the 1X team here in the Bay will accelerate our path to a world full of humanoid robots.”

Robotics 97

Robotics Robotics Artificial Intelligence Prototype  97

Manufacturer's Monthly

MARCH 20, 2025

The evolution has not stopped at integrating VSD into compressors, as Atlas Copco developed its own NEOS Drive in 2014. Their vertical design has reduced the footprint of these compressors by 60 per cent, allowing them to fit in more places. This makes the NEOS Drive a dedicated compressor VSD.

Point of use 68

Point of use Fit Manufacturing 68

Frost & Sullivan Manufacturing

MAY 12, 2025

Our systems, SOPs (Standard Operating Procedures), and culture are optimized for fit-for-purpose partnerships, not bloated bureaucracies. He originally joined as COO for Asia in 2014, driving regional growth and delivery capabilities. They value speed, flexibility, and transparency.

Pharmaceutical 59

Pharmaceutical Fit Automation 59