Robotics Business Review

JANUARY 10, 2024

Robot density data reveal the state of automation worldwide and allow us to compare regions and countries,” Marina Bill, President of the IFR, said. Most automated countries worldwide Robot density by country in 2022. Source: IFR South Korea was the most automated country by robot density in 2022, according to the IFR.

Robotics 143

Robotics Robotics Automation Sourcing 143

Gary Mintchell

AUGUST 15, 2023

The deep dive into automation for machinery came in the mid-80s. Automation and control magazines are half the size of 15 years ago…and maybe even less. I saw it coming in 2013 when I left Automation World and struck out as an independent writer in the space. This was before 1980. I’ve followed these passions ever since.

Automation 130

Automation Sourcing Manufacturing 130

Robotics Business Review

MARCH 21, 2024

Businesses are adopting automation to mitigate labor shortages and increase productivity, found HowToRobot. Source: Adobe Stock Businesses are adopting automation not to replace workers but to augment scarce labor, according to data that HowToRobot released yesterday. from 2013 to 2019, according to the U.S. In the U.S.,

Robotics 122

Robotics Robotics Automation Sourcing 122

Gary Mintchell

JUNE 3, 2024

The CTO of Aras, a PLM company that I visited earlier this year, described the five industry contexts: Mechanization Electrification Automation Digitalization (where we have been for the past few years) Cognitive (where we are beginning to reside) Let us chart the manufacturing and production trade press.

Automation 130

Automation Form Manufacturing Robotics 130

Modern Machine Shop

SEPTEMBER 28, 2023

Photo Credit: SDP/SI In 2013 the company began a reorganization process and consolidated four manufacturing locations into a single facility in Hicksville, New York, in 2017. This simple combination is an effective automation solution for lights-out production of round parts, as it can keep a CNC turning center running for many hours.

Automation 98

Automation Robotics Robotics Aerospace 98

Automation Mag

MARCH 3, 2023

Rockwell Automation has acquired India-based digital technology solutions provider Knowledge Lens. But for many, only a fraction of the data generated by their plants and in their supply chains is ever used,” said Frank Kulaszewicz, senior vice-president of Rockwell Automation’s Lifecycle Services segment. “The

Automation 64

Automation Artificial Intelligence Supply Chain Manufacturing 64

Manufacturer's Monthly

MARCH 17, 2025

Compressed air specialist ELGis facilities run on precision engineering, innovation, and sustainability with automated assembly lines, advanced quality control, and eco-friendly practices that ensure every part and product meets quality and efficiency standards. The ELGi foundry is Pressure Equipment Directive (PED) and ISO-9001 certified.

Manufacturing 57

Manufacturing Assembly Line Advanced manufacturing Automation 57

Robotics Automation News

JULY 6, 2023

Created in 2013 by software engineers Billy Markus and Jackson Palmer as a satirical nod to the popular “Doge” internet meme, Dogecoin initially started as a joke. Cryptocurrencies have been growing exponentially in popularity in recent years, and Dogecoin is one of the newer players on the scene.

98

98

Robotics Business Review

MARCH 24, 2025

He started Cruise in 2013 with Dan Kan. The Bot Company hopes to automate mundane chores The Bot Company aims to create home robots that will assist people with everyday tasks. The Bot Company said it is focusing on automating household chores so people have more time for meaningful pursuits. Register now so you don't miss out!

Artificial Intelligence 59

Artificial Intelligence Robotics Robotics Prototype  59

Robotics Business Review

AUGUST 26, 2024

Source: Olis Robotics End users turn to automation because it promises consistent work with minimal downtime. Olis Robotics said it hopes to tackle this issue with its remote diagnostics system for industrial automation cells. Olis’ new PLC features are specific to Rockwell Automation ’s Allen Bradley PLCs.

Robotics 123

Robotics Robotics Overall Equipment Effectiveness (OEE) Automation 123

Robotics Automation News

JULY 17, 2023

In 2013, […] Despite this, Bitcoin has proved to be an attractive investment option for many Iranians due to its decentralized nature and potential for high returns. Explore [link] for further information.

95

95

Robotics Business Review

DECEMBER 27, 2023

The company offered its FRYR family of automated fry lines and SEMBLR, an automated meal assembly system that can serve a wide variety of ingredients and cuisines. XACT Robotics (2013-2023) Medical robotics provider XACT Robotics laid off all of its 65 employees and shut down in September.

Robotics 135

Robotics Robotics Automation Manufacturing 135

The Automation Blog

FEBRUARY 13, 2023

Daily Industrial Automation News and Tips: Today we're covering news about Cognex, Advantech, Siemens, Aspentech, Thermosystems and more in our Automation This Morning blog for Monday, February 13, 2023. As for our product spotlight, today we're highlighting The Automation Blog's 2013-2020 Video Collection here.

Automation 59

Automation Form Robotics Robotics 59

The Automation Blog

FEBRUARY 23, 2023

Daily Industrial Automation News and Tips: Today we're covering news about IIoT, SMC, HMI Cybersecurity, Thermal Monitoring, Stratix, UPSs, Profinet, Pendant Stations, Power Monitoring and more in our Automation This Morning blog for Thursday, February 23, 2023. And that'll wrap up today's edition of Automation This Morning !

Automation 59

Automation Form 59

The Automation Blog

JANUARY 26, 2023

Daily Industrial Automation News and Tips: This morning we're and more in this edition of Automation This Morning for Thursday, January 26, 2023. Next we have a new Gateway product from Automation-Networks. In our product spotlight today we're showcasing our 2013-2020 Video Collection, available on USB 3.0 or Digitally.

Automation 52

Automation Electronics Form Function 52

Robotics Business Review

FEBRUARY 23, 2024

The Seattle-based company said that by providing the best remote-control user experience, it can “catalyze automation adoption.” ” Founded in 2013 as a spinout from the University of Washington’s Applied Physics Lab, Olis said it has built on over a decade of telerobotics research and development conducted with the U.S.

Robotics 123

Robotics Robotics Automation Sourcing 123

i4.0 today

MAY 8, 2024

Mitsubishi Electric has opened a manufacturing facility for advanced factory automation (FA) systems in the Talegaon Industrial area, Maharashtra, India. www.MitsubishiElectric.com The post Mitsubishi Electric Opens New Manufacturing Plant for Factory Automation Systems in Maharashtra, India appeared first on i4.0 billion INR (24.5

Automation 52

Automation Manufacturing Pharmaceutical Beverage 52

The Automation Blog

MARCH 9, 2023

Daily Industrial Automation News Roundup: Today we're covering news about Transmitters, Aveva, Touch Sensors, Groov Epic, Wifi 6, LOTO, Level Monitoring, PowerFlex, Micro800 & RIO, Modicon TM3 RIO and more in our Automation This Morning blog for March 9, 2023. And that'll wrap up today's edition of Automation This Morning !

Automation 52

Automation Robotics Robotics Fit 52

Modern Machine Shop

MAY 13, 2025

One of the company’s machining cells was in the process of being automated for unattended and lights-out postprocessing of spine implants. Thus far, the five-axis Hurco CNC mill had been equipped with automated clamping capability to reduce the amount of setup required by the operator.

3D printing 52

3D printing Automation Manufacturing Additive manufacturing 52

Control Engineering

SEPTEMBER 6, 2022

Rockwell Automation. Jeff believes that inclusion and diversity are critical to solving complex problems in the design of Rockwell Automation’s next generation products. Jeff began at Rockwell Automation in 2013 as a co-op while attending the University of Akron. Jeffrey Blair, 37. Engineering Manager.

Automation 98

Automation Electronics Function Process manufacturing 98

The Automation Blog

DECEMBER 28, 2022

Thanks to our readers, this year The Automation Blog is on track to surpass its previous records for traffic, and it's already served more unique readers in 2022 that any year since launching in 2013. Time in an automation system, or rather time synchronization, is an important detail that can often be overlooked until it is needed.

Automation 52

Automation Form Process control Function 52

i4.0 today

JANUARY 16, 2023

They achieved this aim using automation technology from Festo. Automation solutions. The necessary scans for the 3D reconstruction are available because American scientist Andrew Tallon fully 3D mapped the building in 2013. The post Festo Automation Technology Aids Restoration of Notre-Dame Cathedral appeared first on i4.0

3D printing 52

3D printing Automation Additive manufacturing Function 52

Robotics Business Review

MAY 16, 2024

LRS plans to use RecycleOS to automate sortation at The Exchange. LRS opens state-of-the-art recycling facility Since 2013, LRS has served millions of residential and commercial customers across nine states: Illinois, Wisconsin, Iowa, Indiana, Michigan, Minnesota, Kansas, and Arkansas. Leading U.S.,

Robotics 121

Robotics Robotics Beverage Artificial Intelligence 121

Robotics Business Review

MARCH 28, 2025

He started Cruise in 2013 with Dan Kan. A study from the Delft University of Technology in the Netherlands found that this problem can be a result of automated decision-making. Podcast sponsored by Wandelbots Simplify automation without limits. Smarter automation starts here. Visit Wandelbots.com to learn more.

Logistics 82

Logistics Robotics Robotics Artificial Intelligence 82

The Automation Blog

AUGUST 23, 2022

The Automation Show, Season 2 Episode 5 Show Notes: Link to LCCF mentioned in video: App Example 109782317. Link to Video Collection mentioned in video: 2013-2020 Collection (USB or Dig.). Sincerely, Shawn Tierney Automation Instructor and Blogger. Sincerely, Shawn Tierney Automation Instructor and Blogger.

Automation 52

Automation Form 52

Foley

APRIL 11, 2023

Trends in the automotive industry—including automation, artificial intelligence, electrification, connectivity, and advanced security—are increasing automotive industry participation (direct and indirect) in ITC investigations involving less conventional automotive technology areas.

Automation 75

Automation Automotive Electronics Supply Chain 75

Robotics Business Review

NOVEMBER 13, 2024

in 2001 and led the Robotic Mobility Group at MIT from 2001 to 2013, where I did fundamental research into wheeled mobile robots, the foundational technology for autonomous mobile robots [ AMRs ] and robotaxis,” Iagnemma told The Robot Report. “I I got my Ph.D. It’s a $275 billion opportunity, with 2.5 billion sq. of warehouse space.”

Robotics 59

Robotics Robotics Artificial Intelligence Logistics 59

Fabricating & Metal Work

MAY 17, 2024

Beckhoff Automation has relocated its Chicago operations to an enhanced and expanded office to better serve customers. Beckhoff opened its first Chicago-area office in 2013 in Woodridge, Illinois. This will further support innovators across industries and drive Beckhoff market share growth. or the globe.

Automation 52

Automation 52

Robotics Business Review

SEPTEMBER 3, 2024

They’re used in industrial automation, automotive, gaming, servers and data centers, and increasingly in healthcare.” “If you looked at PoC [point-of-care] projections in 2013 for AI, remote patient monitoring, telemedicine, and robotic surgery, they were expected to grow, but it wasn’t happening.

Robotics 128

Robotics Robotics Artificial Intelligence Sourcing 128

Automation Mag

JANUARY 21, 2025

CAD Service has reportedly maintained a longstanding relationship with Hexagon, having signed a partnership agreement in 2013. The flagship solution, OpenCAD, is already an essential tool for around half of Hexagon’s EAM Software-as-a-Service (SaaS) customers.

Computer-Aided Design (CAD) 64

Computer-Aided Design (CAD) Manufacturing 64

Mold Making Technology

JANUARY 16, 2024

Established by the Manufacturers Resource Center (MRC) in Allentown, Pennsylvania, in 2013, the overarching goal of the WSCM program is to transform students’ perceptions of manufacturing and manufacturing careers through a video contest. The human inspection component remains integral despite advancements in programming and automation.

Manufacturing 98

Manufacturing Automotive Automation 98

Fabricating & Metal Work

APRIL 11, 2023

The company was founded in 1898 in Nagoya, Japan, and is the industry’s only single-source provider of CNC machines, drives, motors, encoders, spindles and automation systems, all manufactured by Okuma. The company designs its own  CNC controls  to integrate seamlessly with each machine tool’s functionality.

Automation 52

Automation Function Sourcing Manufacturing 52

Automation Mag

OCTOBER 21, 2022

The new company is headquartered in Odense, Denmark, where MiR has managed its global operations since its 2013 launch. He explains that customers in the global market for internal logistics are asking for a full product line of AMRs spanning low, medium and high payload vehicles to automate material transport throughout the value chain.

Logistics 45

Logistics Value chain Robotics Robotics 45

Automation Mag

DECEMBER 16, 2024

The 2013 compromise of Targets computer network was a result of a phishing attack on a vendor, not Target themselves. Steve Mustard is an independent automation consultant and a subject matter expert of the International Society of Automation (ISA). Mustard specializes in real-time embedded equipment and automation systems.

Supply Chain 72

Supply Chain Automation Artificial Intelligence Pharmaceutical 72

Canadian Manufacturing

AUGUST 28, 2024

“Just as steam, electricity, and the internet propelled us to produce more with fewer inputs during previous industrial revolutions, automation, robotics, artificial intelligence, and blockchain are shaping up to do the same in food manufacturing in the fourth industrial revolution,” said Amanda Norris, FCC senior economist.

Artificial Intelligence 52

Artificial Intelligence Food Production Smart manufacturing Manufacturing 52

Automation Mag

AUGUST 3, 2022

Zou joined POSITAL’s Asian operations in 2013 and emigrated from Shanghai to Canada in late 2019. “We have an exciting range of products for the manufacturing and process industries, and I am eager to help customers find ways of using them in their products and production facilities.”. A resident of Markham, Ont.,

Manufacturing 52

Manufacturing 52

Manufacturer's Monthly

AUGUST 9, 2023

By embracing automation, digital transformation, and additive manufacturing, businesses can reshape their operations, overcome traditional constraints, and unlock new opportunities for growth,” he said.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98