MRPEasy

JULY 10, 2023

“We implemented MRPeasy to deal with small inefficiencies but little did we know that it would drastically reduce the time we spend on administrative tasks,” says Alece Piper, Vice President of Bernard Laboratories, a contract manufacturer of industrial chemicals from Cincinnati, Ohio.

Manufacturing 74

Manufacturing 74

AU Manufacturing

FEBRUARY 2, 2023

Manufacturing in the Eurozone continued its streak in the contraction territory in the first month of 2023, dragged by downturns in production volumes and new factory orders. The latest S&P Global Eurozone Manufacturing PMI reading rose for a third successive month to 48.8 in January, up from 47.8 in December.

Manufacturing 85

Manufacturing Supply Chain 85

AU Manufacturing

JULY 3, 2023

million research and development (R&D) contract with a Five Eyes Department of Defence (DoD). million contract with the DoD announced on June 4, 2021, with a final milestone payment expected this month, as revealed in a press release. million contract. DroneShield has won a two-year, $9.9 Approximately $4.5

Manufacturing 68

Manufacturing 68

AU Manufacturing

APRIL 2, 2023

Australia’s manufacturing sector saw a mild decline in March, due to lower market demand that reduced output and inventory levels, marking the first PMI contraction since May 2020. The Judo Bank Australia Manufacturing Purchasing Manager’s Index (PMI) stood at 49.1 in March, down from February’s 50.5, easing past the 50.0

Manufacturing 75

Manufacturing 75

CMTC Manufacturing Tech

SEPTEMBER 29, 2022

Small and medium-sized manufacturers (SMMs) can seek government contracts for stable revenue and growth opportunities. However, the government contract application process often seems overwhelming to businesses that don’t have prior experience. What Are Government Contracts? Finding Government Manufacturing Contracts.

Manufacturing 65

Manufacturing Fit 65

AU Manufacturing

NOVEMBER 29, 2022

Western Australia is set to house a manufacturing facility for extra-large water pipes with Water Corporation ’s new $58 million contract with Steel Mains. . The contract, unveiled today by Water Minister Dave Kelly, will see the production of 1,600 mm diameter water pipes in Kwinana rather than at Steel Mains’ plant in Victoria. .

Manufacturing 84

Manufacturing Freight Supply Chain 84

AU Manufacturing

MARCH 30, 2023

Perth heavy engineering firm Civmec has secured about $100 million worth of new contracts to carry out manufacturing , construction and maintenance activities for the resources sector. In particular, three fresh contracts have been awarded to the firm for the projected Albemarle Lithium Kemerton expansion project in Western Australia.

Manufacturing 52

Manufacturing 52

Metrology

DECEMBER 4, 2022

Economic activity in the manufacturing sector contracted in November for the first time since May 2020 after 29 consecutive months of growth, say the nation’s supply executives in the latest Manufacturing ISM® Report On Business®.

Manufacturing 64

Manufacturing 64

Automation Mag

APRIL 4, 2023

The Canadian manufacturing sector contracted in March as a result of the concurrent decline in both production and new orders. The S&P Global Canada Manufacturing Purchasing Managers’ Index (PMI) registered 48.6. Firms also hired additional workers as confidence in the future of the Canadian manufacturing sector improved.

Manufacturing 83

Manufacturing Lead Time Supply Chain 83

AU Manufacturing

JUNE 29, 2023

billion contract to deliver Queensland’s landmark Queensland Train Manufacturing Program, which will deliver 65 passenger trains for use on the South East Queensland rail network. contract for the Queensland Train Manufacturing Program appeared first on Australian Manufacturing. The post Downer inks $4.6b

Manufacturing 52

Manufacturing Electronics 52

Canadian Manufacturing

NOVEMBER 11, 2022

LONGUEUIL — Embraer design has awarded a contract to Heroux Devtek to deisgn, develop and manufacture the main deck cargo door actuation system for the E190F and E195F Freighter conversion program. “We are very proud to have been selected by Embraer to supply this cargo door actuation system.

Cargo 59

Cargo Manufacturing Supply Chain 59

The Fabricator

OCTOBER 17, 2022

Razor Contract Manufacturing Ltd., Saint John, N.B., has received funding to add up to 29 employees and enhance production.

Manufacturing 59

Manufacturing 59

AU Manufacturing

MAY 28, 2023

Matrix Composites & Engineering has received a contract, projected to be valued at $4 million, to supply offshore drilling contractor TransOcean with drilling riser buoyancy modules. Matrix CEO Aaron Begley stated that the contract with TransOcean improves Matrix’s position as a supplier of drilling riser buoyancy modules.

Composites 52

Composites Manufacturing 52

Canadian Manufacturing

APRIL 17, 2023

In addition to manufacturing, Magna will also be responsible for the engineering of the complete vehicle. In addition to manufacturing, Magna will also be responsible for the engineering of the complete vehicle. “We

Automotive 52

Automotive Manufacturing Supply Chain 52

AU Manufacturing

JUNE 22, 2023

Construction on the Western Range Pilbara iron ore mine has commenced with $1 billion in local contracts handed to Western Australian businesses, including firms focused on green steel manufacturing. In particular, the report fulfils a key electoral promise of green jobs and green steel manufacturing.

Manufacturing 52

Manufacturing Value chain 52

Manufacturing & Logistics IT

JULY 26, 2021

Nulogy, provider of agile supply chain solutions, has been praised by a growing number of global contract packers and manufacturers for the sustainability benefits its software is delivering.

Supply Chain 87

Supply Chain Manufacturing 87

Plastics Today

JANUARY 23, 2024

Micromold will continue injection molding plastic parts for medical device OEMs from Arterex’s FDA-registered facility in Mexico.

Manufacturing 64

Manufacturing 64

Canadian Manufacturing

OCTOBER 12, 2022

WINNIPEG — Pollard Banknote Limited announces that it has been awarded a contract from the Texas Lottery Commission to provide Scratch Ticket Manufacturing and Services. We are excited to once again partner together to deliver products and services that delight players and grow our lottery business.”

Manufacturing 40

Manufacturing 40

Canadian Manufacturing

MAY 16, 2023

Sources: SEMI (www.semi.org) and TechInsights (www.techinsights.com), May 2023 MILPITAS — The current global semiconductor manufacturing industry contraction is expected to moderate in the second quarter of 2023 and give way to a gradual recovery starting in the third quarter, SEMI announced in its Q1 2023 publication of the Semiconductor Manufacturing (..)

Manufacturing 59

Manufacturing Continuous Production Sourcing Supply Chain 59

Canadian Manufacturing

APRIL 14, 2023

“The Fuuz Platform will enable us to meet the rapidly evolving requirements of our copacking and contract manufacturing customers in a timely and cost-effective fashion,” said Jason Tham, CEO, Nulogy. ” .

Manufacturing 40

Manufacturing Supply Chain Automation 40

Plastics Today

MARCH 23, 2023

2023 looks promising for the CMDO industry after a 2022 filled with supply chain issues, inflation, and personnel shortages.

Supply Chain 105

Supply Chain Manufacturing 105

Automation Mag

DECEMBER 1, 2022

The seasonally adjusted S&P Global Canada Manufacturing Purchasing Managers’ Index (PMI) recorded 49.6 This signalled a slower rate of contraction. Canada’s manufacturing economy remained inside contraction territory during November, even though output and new orders fell at slower rates compared to October.

Manufacturing 40

Manufacturing Supply Chain Lead Time Sourcing 40

Manufacturer's Monthly

APRIL 22, 2024

Image: nordroden/stock.adobe.com AML3D Limited announces it has signed a contract with the Australian Government Defence Science and Technology Group (DSTG) to provide components for testing in marine applications. This gives us confidence we will meet the DSTG requirements, creating opportunities for significant new contracts.”

Manufacturing 93

Manufacturing Additive manufacturing 93

Automation Mag

JULY 19, 2023

The performance of the Canadian manufacturing sector continued to worsen during June reportedly due to an underwhelming business environment. The seasonally adjusted S&P Global Canada Manufacturing Purchasing Managers’ Index (PMI) remained below the 50.0-change change mark during June. Registering at 48.8, slightly lower than 49.0

Manufacturing 40

Manufacturing Lead Time Freight Form 40

Additive Manufacturing

AUGUST 27, 2022

August 23, 2022 — NUBURU ® has been awarded an AFWERX Small Business Innovation Research (SBIR) Phase II contract to develop a blue laser-based 3D printing solution with area printing technology. CENTENNIAL, Colo./August

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

Automation Mag

SEPTEMBER 1, 2023

Canadian manufacturing continued its downward trend in August. The seasonally adjusted S&P Global Canada Manufacturing Purchasing Managers’ Index (PMI), remained stuck below the crucial 50.0 Manufacturers adopted a similar attitude, pushing up their own average tariffs to the greatest degree since March. Dropping to 48.0,

Manufacturing 98

Manufacturing Supply Chain 98

Plastics Today

JANUARY 2, 2023

The company is broadening its design and development portfolio and expanding its manufacturing footprint in Germany and the United States.

Manufacturing 105

Manufacturing 105

Plastics Today

NOVEMBER 28, 2023

Evevo says it is committed to serving emerging medical device companies in the Minneapolis ecosystem.

Manufacturing 59

Manufacturing 59

Frost & Sullivan Manufacturing

APRIL 12, 2023

The sourcing of key raw materials by Contract Development & Manufacturing Organizations CDMOs was severely impacted and continues as a significant bottleneck post-COVID. Drug manufacturers are focusing on developing recyclable and intelligent packaging to address these issues.

Form 52

Form Pharmaceutical Supply Chain Manufacturing 52

Plastics Today

OCTOBER 19, 2023

Molded Devices Inc. has rebranded as Aptyx, encompassing more than a dozen companies with expertise in medical molding, extrusion, coatings, and device assembly.

Manufacturing 64

Manufacturing 64

Manufacturer's Monthly

APRIL 14, 2024

Image: Electro Optic Systems Electro Optic Systems Holdings Limited ( EOS ) has announced the companies expanded revenue base, with $24 million in new contracts. The recent contracts mark the company diversifying its revenue base. The post EOS secures $24m in new contracts appeared first on Manufacturers' Monthly.

Manufacturing 84

Manufacturing 84

Design World

JULY 25, 2023

Phase3D, a Chicago-based startup focused on in-situ inspection for powder-based additive manufacturing (AM), has been awarded a two-year $1.25 million contract from the Air Force Research Lab to develop a quality inspection system for cold spray AM (CSAM). CSAM has incredible […] The post Phase3D wins $1.2

Additive manufacturing 130

Additive manufacturing Manufacturing 130

Plastics Today

OCTOBER 19, 2023

Molded Devices Inc. has rebranded as Aptyx, encompassing more than a dozen companies with expertise in medical molding, extrusion, coatings, and device assembly.

Manufacturing 52

Manufacturing 52

Manufacturer's Monthly

APRIL 9, 2024

Image: APchanel/stock.adobe.com UGL, a member of the CIMIC Group, has been awarded a contract, in joint venture with ADCO, to construct new railcar maintenance facilities at Bellevue, Western Australia, for the State’s Public Transport Authority. Works commenced in the first quarter of 2024 and are expected to finish in mid-2026.

Manufacturing 99

Manufacturing 99

Design World

MARCH 20, 2023

ARRIS — manufacturer enabling high-performance composites at scale with new design latitudes for mass-market consumer products, transportation, and industrial applications — recently signed a contract manufacturing partner (CM) to further increase production part capacity.

Composites 195

Composites Manufacturing 3D printing Additive manufacturing 195

Plastics Today

JUNE 14, 2023

Acquisition of the US-based injection molder doubles size of the group, which also includes Formula Plastics and three Italy-based medical molding, extrusion, and product engineering firms.

Manufacturing 52

Manufacturing 52

Canadian Manufacturing

JANUARY 9, 2024

These contracts reflect a diverse range of industries, indicating the broad applicability and demand for Nextech3D.AI’s services. When we look at the diverse range of contracts, renewals, and the enthusiastic interest we’re receiving it reaffirms our conviction as AI/AR and 3D industry leaders.

3D printing 105

3D printing Manufacturing Advanced manufacturing 105