Tool Steel Improves the Efficiency of Molds, Injection Molding Using AM
AddUp partners with Swiss Steel Group to introduce Printdur HCT, enabling manufacturers to significantly reduce production cycles using conformal cooling channels.
A test plate produced with Printdur HCT material. Source: AddUp
AddUp will soon be releasing Printdur HCT, a tool steel optimized for injection molding that meets all customer requirements such as corrosion resistance, hardness and wear resistance for injection molding applications.
The Printdur HCT was developed by Swiss Steel Group (SSG) based on the conventional standard tool steel 1.2083/AISI420 tailored for additive manufacturing (AM) with focus on powder bed fusion machines like AddUp’s FormUp 350. Following strict internal manufacturing readiness level protocols, AddUp’s engineers were able to achieve up to 50% improvement in build speed without cracks and extremely low porosity, ensuring more than 99.90% material density when compared to the standard material.
The company also says surfaces can be built up in excellent quality and without any smoke residue. The Printdur HCT material was designed for the requirements of injection molding and can significantly reduce production cycles using conformal cooling channels. Most of the internal cooling channels can be optimally built to a sufficiently good quality, without any support structures.
Because of an enhanced hardness range of 53-57 HRC and high wear resistance Printdur HCT offers an improved and longer service life for mold inserts. With simple, one-step heat treatment at 540°C, Printdur HCT achieves ~53 HRC hardness and is ready to be used for injection molding applications because the material can withstand high temperatures without losing hardness.
Moreover, because the material is produced without nickel and cobalt, significant damage to the environment and the operator could be avoided.
Printdur HCT’s manufacturing readiness level 3 has been achieved, which makes it ready for producing high-quality proof of concepts. Currently being used on the FormUp 350 machine located at AddUp’s Tooling Competence Centre in Aachen, Germany, Printdur HCT is immediately available for prototyping and once fully developed will be available for end-use production parts.
Related Content
-
3D Printing Technologies for Moldmaking Applications
3D printing technologies, from conformal cooling to complex mold building, are making an impact on the moldmaking industry, one innovation at a time.
-
VIDEO: How Molds Make Life Happen
Hasco America Inc.'s Engineering Manager, Brenda Clark, brings her lifelong expertise to our MoldMaking Technology audience by shedding light on new innovations, what skills are needed to be successful in the industry and how Molds Make Life Happen.
-
Variable Density-Coated Tool Steel for High-Wear Molds
A mold builder can have an abundance of venting and fully dense solid areas in steel by using variable density sintering to eliminate gas trap defects in high-wear molds.
