CO2 Cleaning Effectively Generates Contamination-Free Mold Surfaces
NPE2024: Cool Clean Technologies offers dry ice blasting and CO2 snow cleaning methods for more sustainable, no-touch surface preparation and plastics deburring.
Cool Clean Technologies is highlighting its specialization in CO2 cleaning. The company’s spray-based products incorporate CO2 in all phases for cleaning, surface preparation and plastics deburring, removing contamination from a wide range of surfaces. Its CO2 spray methods can be configured in two ways: dry ice blasting and CO2 snow cleaning.
Dry ice blasting is a fast and effective cleaning solution that surpasses traditional methods for plastic and rubber molds. Dry ice blasting is an aggressive form of cleaning using dry ice pellets, referred to as “blasting rice.” When pellets of dry ice are propelled at high speeds and impact the mold, they sublimate immediately, transferring kinetic energy to the surface and removing any existing debris.
Alternately, CO2 snow cleaning generates the cleaning spray by condensing liquid CO2 to solid CO2, or “snow,” inside the spray nozzle assembly. CO2 spray cleaning systems provide cost-effective, no-touch cleaning that can be dropped into existing production lines with a fraction of the footprint of water-based cleaning. Further, CO2 cleaning is easily automated for surface preparation on automotive plastics.
Importantly, Cool Clean Technologies says there is no waste disposal required when using these solutions, as there are no byproducts, spent solvents or water used in the process. Moreover, the CO2 the company uses is recycled CO2 captured from industrial processes and therefore does not create additional greenhouse gases
Related Content
-
Bonding, Sintering Tech Advances Metal Bonding for Mold, Die Components
NPE2024: Punch Industry USA exhibits P-Bas, intended to replace the use of 3D printers when producing mold and die components, as well as a variety of mold component supplies.
-
Hydraulic Gating Cutting Reliably Separates Molded Parts
NPE2024: Material displacement technology offered by Ermanno Balzi Srl enables precise separation of the molded part from the gate during the molding cycle.
-
Use AI, Machine Learning to Take Variability Out of Manufacturing
Variability has always created insurmountable challenges for manufacturers. However, in the last decade, impact has been more painful due to a lack of experienced workforce. By leveraging technological advancements, particularly in AI, manufacturers can gain a transformative competitive advantage in both cost reduction and workforce development.