Manufacturing Management

APRIL 11, 2024

In a dynamic convergence of industry experts, innovators, and enthusiasts, igus, recently hosted the RBTX Low-Cost Robotics Live Workshop.

Robotics 40

Robotics Robotics 40

AU Manufacturing

AUGUST 16, 2022

If you’re in business on the Central Coast, the program of nine free capability-building workshops on offer as part of the Central Coast Industry Festival is an absolute must to attend. Festival manager Alex Blow said, “We have some world-class experts delivering the workshops, and these would normally cost thousands to attend.

Beverage 92

Beverage Manufacturing 92

Manufacturer's Monthly

FEBRUARY 15, 2024

The concept of an electric work trestle emerged after Frédéric noticed the widespread use of traditional trestles in different workshops. Designed for workshops, the e-tréteaux is part of the electric ergonomic equipment that improves the operators’ daily work routines.

Function 60

Function Manufacturing 60

NIST Manufacturing

DECEMBER 8, 2023

Technical standards for digital twin capabilities in the semiconductor and microelectronics industry will be the subject of a December workshop sponsored by the CHIPS Research and Development Office. The workshop will be a hybrid in-person and

52

52

The Fabricator

APRIL 9, 2024

Experience the future of laser technology at ALAW. From pioneering CO2 lasers to cutting-edge innovations, witness the latest in laser applications. Explore advanced optics, process monitoring, and more, gaining a competitive edge in manufacturing. Join us and stay ahead of the curve.

Manufacturing 64

Manufacturing 64

NIST Manufacturing

OCTOBER 24, 2023

The CHIPS Research and Development Office’s Chiplets Interface Technical Standards Workshop will be held as a hybrid in-person and virtual event from 8:30 a.m. to 5:30 p.m. Eastern Time December 12, 2023, and 8:30 am to 12:30 pm December 13, 2023

64

64

Fabricating & Metal Work

JUNE 12, 2023

HEIDENHAIN CORPORATION will host a special, free 5-axis machining workshop at its U.S. The “Power of 5” workshop will cover the five “P”s to consider for greater success during 5-axis machining operations. The workshop is free and open to anyone interested in leveraging new technology to improve their 5-axis machining operations.

Fit 52

Fit Manufacturing 52

NIST Manufacturing

DECEMBER 8, 2023

The CHIPS Research and Development Office’s Chiplets Interfaces Technical Standards Workshop will be held as a hybrid in-person and virtual event from 8:30 a.m. to 5:30 p.m. Eastern Time December 12, 2023, and 8:30 am to 12:30 pm December 13, 2023

52

52

AU Manufacturing

APRIL 26, 2023

In addition to the aforementioned efforts, the project will also include three junior wood workshops, a junior metal workshop, a senior furniture workshop, and a senior engineering workshop, together with related specialty rooms, storage, amenities, and more parking.

Manufacturing 67

Manufacturing 67

MEM

APRIL 21, 2023

Beta Tools, the Italian-based designers and manufacturers of high-quality tools for industrial maintenance, is set to unveil its Modular Workshop System to the food manufacturing industry at this year’s Foodex. Beta’s Modular Workshop Systems, by optimising process, greatly support this need.” or call 01952 677977.

Fit 52

Fit Manufacturing 52

The Fabricator

DECEMBER 16, 2022

World-Class Roll Forming Workshop features a slightly different format for 2023 that will allow you access to all the expert speakers at the same time.

Form 59

Form 59

The Fabricator

JANUARY 27, 2023

Schuler North America, subsidiary of Schuler Group GmbH, will host its DigitalizationandModernization Workshop on February 23, 2023. The workshop is also the grand opening of the company’s Michigan Ave Service Facility in Canton, Mich.

59

59

NIST Manufacturing

AUGUST 1, 2023

In June 2023, NIST’s Industrial Wireless System Team, as part of the NIST-led Industrial Wireless Technical Interest Group, held an online workshop on “Deployment Architectures and Technologies for Enhancing the Performance of Industrial Wireless

52

52

AU Manufacturing

JUNE 6, 2023

BAE Systems Australia and technology incubator Stone & Chalk are fostering innovation within the defence and security sectors with their new “Pathfinder Series” workshops. The Pathfinder Series will begin in Adelaide on 23 June, followed by the Melbourne workshop in October.

Supply Chain 52

Supply Chain Manufacturing 52

Mold Making Technology

APRIL 24, 2023

Photo Credit: Cardinal Manufacturing Cardinal Manufacturing , a company within a school (Eleva-Strum School District), where students learn about manufacturing and gain firsthand experience, has announced an upcoming workshop in April and an open house at the beginning of May. Snacks and lunch will be provided.

Manufacturing 52

Manufacturing 52

The Fabricator

JANUARY 5, 2023

In this episode of In the Workshop, Detroit-based welder and fabricator Josh Welton shares his quick and dirty approach to repairing and welding a fatigued metal section on a commercial Trail Mate straight edger owned by his father-in-law.

64

64

AU Manufacturing

JUNE 21, 2023

The Queensland government has launched the Mount Isa Engineering and Trade Workshop to provide modern engineering facilities for students across civil engineering and technology fields. The workshop is expected to boost enrolments in the coming years to up to 950 students per year, the Queensland government said.

Electronics 52

Electronics Manufacturing 52

Plastics Today

JULY 28, 2023

Leistritz Extrusion is holding two-day workshops devoted to twin-screw extrusion technology in Texas and New Jersey in November.

52

52

AU Manufacturing

SEPTEMBER 7, 2022

To register for the course, visit AE2P’s workshop page. Aside from Triannni and Pears, the Sydney session also saw a presentation from Roger Horwood, industrial expert and principal consultant at Energetics. .

Industry 4.0 76

Industry 4.0 Industry 4.0 76

NCMS

JULY 24, 2023

Naval Sea Systems Command (NAVSEA) Mission We repair, maintain and […] The post Request for Demonstration: Navy Visualization Workshop appeared first on National Center for Manufacturing Sciences.

Manufacturing 40

Manufacturing 40

The Guardian Manufacturing

DECEMBER 3, 2022

Those health risks mean the “world’s workshop” is heading for a difficult winter, casting a shadow over the prospects for international trade. There are concerns that more freedom of movement could allow the virus to rip through a population where immunity is lower than in the west. Continue reading.

Supply Chain 75

Supply Chain Manufacturing 75

NIST Manufacturing

MARCH 1, 2023

In February 2023, NIST’s Allison Barnard Feeney addressed several standards for capturing product manufacturing information in a presentation to the Secure Data Exchange/Interoperability workshop, which was held by the Department of Defense (DoD)

Manufacturing 52

Manufacturing 52

MEM

JANUARY 30, 2023

With 17% of an average household’s energy bills being consumed in the kitchen, according to the Energy Saving Trust , the Faculty of Engineering’s Food, Water, Waste research group has teamed up with Tiger Community Enterprise CIC to deliver workshops for volunteers.

Prototype  52

Prototype  Sourcing Manufacturing 52

The Fabricator

JULY 19, 2022

will hold its fifth annual, two-day workshop on issues in lithium battery recycling and lifecycle management Aug. AATBatt Intl. 8–9, 2022, at the Michigan Union in Ann Arbor, Michigan.

59

59

Picomto

OCTOBER 19, 2022

L’article How do digital tools facilitate communication in the workshop? One of the tools that the company manger has is communication. The latter does not only help establish a good rapport with and between employees, [.]. est apparu en premier sur.

52

52

NIST Manufacturing

JULY 1, 2022

On May 31, 2022, NIST's Rick Candell gave the keynote address to IEEE's workshop on Performance Assessment of Industrial Wireless Systems. The workshop was organized and facilitated by NIST's Kang Lee. Candell pointed out that wireless systems are

52

52

Fabricating & Metal Work

DECEMBER 6, 2022

Registration is now open for the Roughness, Texture, and Tribology class and workshop, which will be held in Livonia, Michigan, May 3–5. The post In-Person Surface Roughness, Texture, and Tribology Class/Workshop to be Held in May appeared first on Fabricating and Metalworking. michmet.com.

Function 52

Function Manufacturing 52

The Fabricator

AUGUST 29, 2022

will present at the FMA Coil Processing Workshop in Corpus Christi, Texas, Sept. Steve Baker of The Bradbury Group, Moundridge, Kan., 20-21, 2022.

59

59

The Fabricator

MARCH 2, 2023

Schuler North America, subsidiary of Schuler Group GmbH, recently hosted a DigitalizationandModernization Workshop.

52

52

Picomto

NOVEMBER 29, 2021

L’article 4 ways to install internet in the workshop est apparu en premier sur. In fact, this information and communication tool offers exceptional growth prospects. It is an excellent means of exchange, communication, working, learning and trading. This interaction tool helps [.].

52

52

Manufacturing Tomorrow

APRIL 5, 2023

Leading packaging machinery and robotic automation specialist, RMGroup, in collaboration with ABB Robotics UK, held an engaging interactive workshop on 30 March. The well-attended event, which offered guidance through the ever-changing robotics and automation landscape, took place at ABB’s Milton Keynes headquarters.

Robotics 40

Robotics Robotics Automation 40

E&T

SEPTEMBER 16, 2022

While we might dimly recall that the South Bank, with its repurposed factories and workshops, was once the cradle of the Industrial Revolution, it’s hard to imagine today that much traditional manufacturing goes on in trendy boroughs replete with digital start-ups, innovation spaces and wall-to-wall fintech. Image credit: Merrell/Carmel King.

Food Production 45

Food Production Manufacturing Form Automation 45

Manufacturing Management

OCTOBER 24, 2022

The University of Nottingham’s Faculty of Engineering has continued its commitment to aspiring engineers following the major refurbishment of two state-of-the-art workshop spaces.

40

40

Plastics Today

FEBRUARY 22, 2023

Classroom sessions on the first day will be supplemented by hands-on demonstrations at the Leistritz lab on day two.

104

104

Manufacturing Management

JANUARY 23, 2024

To encourage more girls to consider careers in science, technology, engineering and maths (STEM) subjects, global engineering technologies company, Renishaw, recently hosted students from Denmark Road High School in Gloucester.

59

59

Manufacturing & Logistics IT

NOVEMBER 28, 2018

Katana, the smart workshop software company, has launched what it describes as the first-ever Smart Workshop Software, providing small manufacturers with affordable and easy to use inventory and production management.

Manufacturing 44

Manufacturing 44

Manufacturing Tomorrow

APRIL 4, 2023

Attendees will have the opportunity to meet with hundreds of exhibiting companies, attend dozens of educational sessions on the show floor, interactive workshops and network at several special events

40

40