The solution enables a high level of flexibility and consistency and offers many interfaces in terms of interoperability. The two companies will display how this works at the Hannover Messe trade fair in Hanover, Germany, from April 17th to 21st, 2023, in hall 15, booth E34.

SOUTHFIELD, Mich, March 20, 2023 - To make a smart factory a reality, machines and systems from all sub-areas must communicate with each other and end-to-end digitalization must be achieved. The Dürr Group uses its manufacturing and digitalization knowledge to combine hardware and software. Together, Dürr's software specialists and the Group subsidiary iTAC developed a modular solution for manufacturing planning, execution, control, monitoring, optimization, and predictive analysis. Instead of monolithic individual solutions, the new Manufacturing Operations Management (MOM) system relies on microservices that provide functionality as required. The solution enables a high level of flexibility and consistency and offers many interfaces in terms of interoperability. The two companies will display how this works at the Hannover Messe trade fair in Hanover, Germany, from April 17th to 21st, 2023, in hall 15, booth E34.

There are three central superordinate control components in every digital factory: MES (Manufacturing Execution System) controls and monitors production, SCADA (Supervisory Control and Data Acquisition) collects and analyzes data, and HMI (Human Machine Interface) visualizes production and process flow. Until now, these components, for example, the MES sub-segment, were mostly designed as stand-alone solutions.
Dürr and iTAC have combined their competencies and merged the functional scopes of MES, SCADA, and HMI into a uniform MOM architecture. This was made possible by combining Dürr's DXQcontrol product family with iTAC's iTAC.MOM.Suite. Manufacturing companies, whether manufacturers or suppliers, thus receive a future-proof industrial digitalization solution with interoperable modules that cover all smart factory functionalities.

Microservices architecture for agile manufacturing
While previous MES solutions are monolithically structured, i.e., a single software product encompasses different functionalities, such as data acquisition or logistics, Dürr and iTAC's MOM architecture takes a modular approach. Multiple microservices act and communicate with each other while performing their tasks independently. Unlike monolithic solutions, microservices have self-sufficient data storage and open interfaces for communication with other services for flexible deployment. Only necessary modules are installed, making operation more sustainable, as fewer servers are required. The MOM architecture's modular structure is also less error-prone than monolithic architectures, increasing plant availability.

Variable availability: Cloud, on-site, or hybrid
Another advantage of microservices is they can be flexibly installed on IIoT platforms in the cloud, on-site (on-premises), or in hybrid factory deployments. Customers can use specific cloud services while rolling out other functionalities on-site if there are operating costs or production stability concerns, for example. The hybrid solution is particularly advantageous for large data volumes in the terabyte range. Processing some of the data locally ("on-edge"), i.e., within the local environment, saves time, costs, and energy because not all data sets have to be transferred to the cloud/IIoT platform via many transactions. In addition, local processing brings the necessary speed to control manufacturing processes in real-time.
 
Sustainable Production Management
Dürr and its subsidiaries iTAC Software AG and Dualis GmbH IT Solution will present other industry development trends in addition to the MOM presentation at the Hannover Messe trade fair. Another focus is on sustainable and energy efficient production management. Dürr will present its ISO 50001-certified DXQenergy.management software that maps media consumptions throughout the production line, systematically detects consumption anomalies, and consequently identifies potential savings. The GANTTPLAN planning tool from DUALIS monitors energy costs incurred during production planning.

Manufacturing Analytics and Intelligence
Dürr and iTAC's analysis tools are all about using artificial intelligence to improve production quality and availability. They can act as MOM system components. The products evaluate production and quality data, which can detect possible defects or impending wear but also use machine learning to make forecasts. Prevention and prediction services and the integration of edge technologies result in optimization, increased added value, and data sovereignty.

Advanced Planning and Scheduling (APS)
The Group offers intelligent tools from Dürr, iTAC, and DUALIS as an overall solution for the APS field. These tools plan and optimize production order execution, consider available resources and capacities as well as material requirements and necessary maintenance intervals. The solution has many benefits, such as short delivery times, high delivery reliability, and permanent cost optimization.

Joint trade fair appearance of Dürr, iTAC, and DUALIS
More than 4,000 exhibitors will present their solutions on current trends at the major industrial trade fair in Hanover, Germany, where the digitalization of production plays a central role. Dürr, iTAC, and DUALIS will present end-to-end solutions for a smart factory at their joint booth (hall 15, booth E34) in line with the theme "Real industrial transformation. Digitize today. Enable tomorrow."

About Dürr
The Dürr Group has been established in the United States since 1970 and currently employs approximately 1,400 people. From the Campus with a state-of-art validation, testing, and training center in Southfield, MI, Dürr USA represents four of the five divisions. Paint and Final Assembly Systems offers equipment for painting and assembly processes, while Application Technology provides paint, sealants and adhesives application systems. Dürr's Clean Technology Systems division is leading in air pollution control, noise abatement systems, and battery electrode coating lines. Dürr has three locations in the US: Dürr Systems, Inc. in Southfield, MI, and De Pere, WI; Durr Universal, Inc. in Stoughton, WI. The subsidiary Schenck USA Corp., with headquarters in Deer Park, NY, and additional locations in Hudson, MA, and Southfield, MI, offers balancing machines, vibration and condition monitoring systems, spin testing and services for the aerospace, automotive and general industry. The customers of Dürr USA include automotive and commercial vehicle manufacturers, as well as their suppliers, and a diverse group of other industries like the chemical or wood industry. HOMAG Machinery North America operates the production facilities for HOMAG Group in Grand Rapids, MI, which is also the base for the sales and service company Stiles Machinery Inc. The HOMAG Group produces machinery and equipment for the woodworking industry.

The Dürr Group is one of the world's leading mechanical and plant engineering firms with extensive expertise in automation, digitalization and energy efficiency. Its products, systems and services enable highly efficient and sustainable manufacturing processes in different industries. The Dürr Group primarily supplies the automotive industry, producers of furniture and timber houses as well as the chemical, pharmaceutical, medical devices and electrical engineering sectors. It generated sales of €4.3 billion in 2022. The company has about 18,500 employees and 123 business locations in 32 countries. The Dürr Group operates in the market with the brands Dürr, Schenck and HOMAG and with five divisions:
• Paint and Final Assembly Systems: paint shops as well as final assembly, testing and filling technology for the automotive industry, assembly and test systems for medical devices
• Application Technology: robot technologies for the automated application of paint, sealants and adhesives
• Clean Technology Systems: air pollution control, coating systems for battery electrodes and noise abatement systems
• Measuring and Process Systems: balancing equipment and diagnostic technology
• Woodworking Machinery and Systems: machinery and equipment for the woodworking industry