Automation World
MARCH 13, 2023
Being aware of social engineering practices is the first step in protecting you, your team and network, as well as being a good starting point for a holistic cybersecurity approach.
Design World
MARCH 13, 2023
Dr. Mark Marshall has been appointed as chief engineer of Silicon Sensing Systems Ltd. Dr. Marshall joined Silicon Sensing in 2017 as the lead engineer on numerous inertial programs. Immediately prior to commencing as Chief Engineer, he was the company’s consultant engineer and electronics discipline manager. In this role, he was responsible for the electronics… The post Silicon Sensing appoints new Chief Engineer appeared first on Design World.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Gary Mintchell
MARCH 13, 2023
The entire scope of technology going under Augmented Reality (AR), Virtual Reality (VR), Extended Reality (XR), Metasphere, and whatever comes next has been hyped beyond the Gartner Hype Cycle. That brings out the skeptic in me. Many trade show demonstrators have fitted me with a variety of glasses, goggles, hoods, hard hats with goggles, and many I’ve no doubt forgotten.
Design World
MARCH 13, 2023
3D Systems recently announced VSP Connect, a centralized, cloud-based surgical planning portal that integrates automated workflows and artificial intelligence (AI). As the latest addition to the company’s VSP surgical planning solutions, VSP Connect gives device manufacturers and surgeons real-time patient case visualization and improved collaboration capabilities.
Speaker: Kevin Kai Wong, President of Emergent Energy Solutions
In today's industrial landscape, the pursuit of sustainable energy optimization and decarbonization has become paramount. Manufacturing corporations across the U.S. are facing the urgent need to align with decarbonization goals while enhancing efficiency and productivity. Unfortunately, the lack of comprehensive energy data poses a significant challenge for manufacturing managers striving to meet their targets.
The Fabricator
MARCH 13, 2023
Industrial Succession Group purchased a small California sheet metal operation in 2020. It wasn’t a strip-and-flip affair. Instead, it streamlined information management and doubled its head count and overall revenue.
Canadian Manufacturing
MARCH 13, 2023
ST. THOMAS — On Mar. 13, Volkswagen, Europe’s largest automaker, announced that its subsidiary PowerCo will establish an electric vehicle (EV) battery manufacturing facility in St. Thomas, Ontario, Canada. Following this announcement, François-Philippe Champagne, Canada’s Minister of Innovation, Science and Industry, and Vic Fedeli, Ontario’s Minister of Economic Development, Job Creation and Trade, issued the following joint statement: “Earlier today, Volkswagen announced that it has sele
Manufacturing Technology Today brings together the best content for manufacturing technology professionals from the widest variety of industry thought leaders.
Plastics News
MARCH 13, 2023
Hoffer Plastics Corp. has only continued to grow since it won the Processor of the Year award in 2012. Now it has been honored with the Sustained Excellence Award.
Robotics Automation News
MARCH 13, 2023
Plus One Robotics, a provider of advanced AI vision software and solutions for robotic parcel handling, has raised $50 million in Series C funding. The round was led by Scale Venture Partners, with Partner Rory O’Driscoll joining the board of directors.
Plastics News
MARCH 13, 2023
Mepol makes recycled, high-performing technical compounds, officials with LyondellBasell in Dallas said in a news release. It operates compounding plants in Italy and Poland.
Additive Manufacturing
MARCH 13, 2023
The beauty of today’s manufacturing environment is that anyone can start a 3D printing service bureau and begin printing parts today. According to a recent report by Persistence Markets , the 3D printing service bureau industry is projected to surge eight times the size of its present state over the next decade. Forget the lemonade stand, today’s industrious children are downloading CAD drawings from the internet, printing figurines and selling them amongst their classmates.
Advertisement
As engineers push the boundaries of innovation with groundbreaking hardware products, their success depends largely on the speed and efficiency of production. The challenge? Manual processes and disparate systems lead to multiple versions of documents, incomplete records, and duplicated work, creating a chaotic system of records that is difficult to manage.
E&T
MARCH 13, 2023
A South Korean spacecraft has captured stunning new images of the lunar surface and Planet Earth. Korea Pathfinder Lunar Orbiter, also known as Danuri, is South Korea’s first ever spacecraft to orbit the Moon. Launched on a SpaceX rocket from the US in August 2022, it began travelling towards the Moon and was inserted into lunar orbit late in December.
The Fabricator
MARCH 13, 2023
When working with metal or metal alloys it is critical to know that it is the right one. The correct elemental composition needs to be ensured in order to meet the expectations of your customers, your production process, or to check what your supplier has delivered. For welding and fabricating it is critical that you know the materials you are working with are what you need them to be and that they are accurate in their composition.
Plastics News
MARCH 13, 2023
Lear Corp. will fill the remaining 268,000 square feet at the former Cadillac Stamping Plant on the city's east side, the company confirmed. A building permit for about $1 million of construction work was issued for the site last Tuesday, according to Detroit building permit records.
Robotics Automation News
MARCH 13, 2023
Teleo, a company building autonomous technology for heavy construction equipment, has agreed deals with construction customers John Aarts Group, Teichert and Tomahawk Construction for remote-operated wheel loaders, bulldozers, and dump trucks, respectively.
Advertisement
Outdated or absent analytics won’t cut it in today’s data-driven applications – not for your end users, your development team, or your business. That’s what drove the five companies in this e-book to change their approach to analytics. Download this e-book to learn about the unique problems each company faced and how they achieved huge returns beyond expectation by embedding analytics into applications.
Dinesh Mishra
MARCH 13, 2023
3D printing ensures high quality in dental prosthesis production // Producing metal dental prostheses eight times faster Ditzingen/Cologne, 09 March 2023 – The high-tech company TRUMPF is showing the new TruPrint 1000 at the world’s leading dental trade show IDS. “This 3D printer is the fastest machine on the dental market. With better quality, the TruPrint 1000 manufactures at a higher speed.
Robotics Automation News
MARCH 13, 2023
Fernride, which specializes in autonomous trucking, and Terberg, a maker of terminal tractors, have agreed a collaboration to develop an automated terminal tractor CE certified for commercial production. This solution offers both teleoperated and autonomous driving capabilities to ensure a smooth and gradual transition to full autonomy with human-in-the-loop.
E&T
MARCH 13, 2023
Mark Zuckerberg's Meta has revealed it is working on a new social network solely designed for sharing text updates. The new app could become the most high-profile rival to Twitter and Mastodon. The former has been rife with chaos since Musk's aggressive takeover, with the company struggling to hold onto its advertising base amid large-scale staff layoffs and a succession of outages for the platform.
Robotics Automation News
MARCH 13, 2023
Starship Technologies, the world’s leading provider of autonomous delivery services, announced today that its robots have started on-demand food deliveries at The University of North Carolina at Charlotte (UNC Charlotte).
Advertisement
Next-gen manufacturers are redesigning factories to enable agility at every stage of production. From more timely communication between engineers and technicians to technologies that empower real-time collaboration, they’re getting ahead by making iterations and improvements during a build, across the production line at scale. This level of flexibility means they can develop more quickly than their legacy counterparts.
Manufacturer's Monthly
MARCH 13, 2023
An increasing number of advanced manufacturing businesses are looking towards the defence industry for opportunities in supply chain participation. Manufacturers’ Monthly learns about the incredible support Systematiq gives to enter and thrive in the defence market. Coming from a military family, Erin O’Brien’s first job was at the Defence Material Organisation, now referred to as the Department of Defence.
Plastics News
MARCH 13, 2023
Redline Plastics wins PN Excellence Award winner for Employee Relations, part of its "golden rule" for the organization.
Manufacturer's Monthly
MARCH 13, 2023
Perth-based robotics company FBR Limited’s strategic agreement with UK-based M & G Investment Management will fund the manufacture and commercial deployment of three additional next-generation Hadrian X robots. The three new robots will be built on USA truck bases and will then be immediately deployed to offer ‘Wall as a Service’ via the existing Fastbrick Americas LLC entity.
The Fabricator
MARCH 13, 2023
For press shops looking to implement smart manufacturing, workforce engagement in development is key to success.
Advertisement
Think your customers will pay more for data visualizations in your application? Five years ago, they may have. But today, dashboards and visualizations have become table stakes. Turning analytics into a source of revenue means integrating advanced features in unique, hard-to-steal ways. Download this white paper to discover which features will differentiate your application and maximize the ROI of your analytics.
Manufacturer's Monthly
MARCH 13, 2023
Aeromech was founded to bridge the gap between academia and industry by creating opportunities for big thinkers. Billy Friend sat down with founder and director Joe Bryant to learn about the company’s ambitions to propel Australia into the upper echelon of advanced composites manufacturing. Fresh from university, Joe Bryant began his career as an aerospace engineer with Airbus, working on the company’s first composite helicopter, the ARH Tiger.
AU Manufacturing
MARCH 13, 2023
The University of Adelaide said it is ready to help train the workforce and provide the research expertise needed to help Australia achieve its goal to be a nuclear-powered defence force. The University’s statement comes after the Australian government announced its plans to purchase US submarines as an interim measure before building UK-designed craft in Adelaide.
Manufacturer's Monthly
MARCH 13, 2023
Matthew Hunter, national manager, emerging technology, Konica Minolta breaks down to Manufacturers’ Monthly the key opportunities and challenges in growing sovereign capability in Australia’s defence and aerospace manufacturing ecosystem. The 3D printing industry has significantly transformed, shifting from prototyping to end-use applications. The increasing ability to create strong, affordable 3D printed parts using various innovative materials has fuelled this transition.
AU Manufacturing
MARCH 13, 2023
Australian Prime Minister Anthony Albanese and Indian Prime Minister Narendra Modi have agreed to further strengthen the bilateral relationship between the two countries during talks at the Annual Leaders’ Summit held Friday in New Delhi. The leaders declared their intentions to conclude the ambitious Comprehensive Economic Cooperation Agreement (CECA) as soon as possible, building on the landmark trade agreement inked last year.
Advertisement
Bringing new and improved products to market takes more than just good ideas. It requires agile, iterative production, and real-time collaboration. Most manufacturers recognize the risk of not adapting, but they’re hampered by technologies like MES that haven’t kept up with the pace of hardware innovation. As new manufacturers enter the market with technologically progressive ways of building at scale, existing manufacturers must adapt to stay relevant.
Modern Materials Handling
MARCH 13, 2023
Making the business case for automation and selecting the right solution isn’t easy. But with the right partner, you can trust that your future will be in good hands and that the right systems will be implemented and maintained going forward.
AU Manufacturing
MARCH 13, 2023
IperionX Limited , a provider of sustainable titanium technologies, is delivering spherical titanium metal powders to global additive manufacturing system provider SLM Solutions under a newly signed memorandum of understanding (MOU). IperionX will supply the powders from its planned Titanium Demonstration Facility in Virginia, the company said in an ASX announcement.
Plastics Today
MARCH 13, 2023
Mepol Group is a manufacturer of recycled technical compounds with operations in Italy and Poland.
AU Manufacturing
MARCH 13, 2023
Researchers from Lancaster University in England have developed a technique that allows them to see the 3D internal structure of rechargeable batteries for the first time. The team was led by Professor Oleg Kolosov from Lancaster’s Physics Department in collaboration with University College London and NEXGENNA Faraday Institution Consortium, the university said in a news release.
Advertisement
Just by embedding analytics, app owners can charge 24% more for their product. How much value could you add? This framework from Software Pricing Partners explains how application enhancements can extend your product offerings. You’ll learn: How to take a disciplined approach to pricing The three elements of the Packaging Decision Framework Ways to structure your new embedded analytics offering Download the White Paper to learn about How To Package & Price Embedded Analytics.
Expert insights. Personalized for you.
283 
Let's personalize your content