Big Data Collection and Analysis
Automation World
SEPTEMBER 9, 2022
A look at key insights gathered recently from Automation World’s research into industry’s use of Big Data collection and analytics technologies.
Automation World
SEPTEMBER 9, 2022
A look at key insights gathered recently from Automation World’s research into industry’s use of Big Data collection and analytics technologies.
Design World
SEPTEMBER 9, 2022
Located in booth 1128, Bosch Rexroth is bringing its technical expertise and factory automation experience to the world of autonomous mobile robots. As a leading provider of factory automation and assembly technologies, Bosch Rexroth understands the intricacies of intralogistics processes and has developed a comprehensive portfolio of AMR solutions to help solve everyday workplace challenges… The post Bosch Rexroth at Autonomous Mobile Robots and Logistics Week 2022 appeared first on Desig
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Gary Mintchell
SEPTEMBER 9, 2022
At the start of the Ukraine conflict, CISA issued a “Shields Up” alert to all critical infrastructure in an effort to stave off potential cyber attacks from Russia. 6 months later, the proverbial “shields” are still up but is the U.S. critical infrastructure more secure because of it? I was wondering if I should have more security than I have being a manufacturing and industrial site.
Design World
SEPTEMBER 9, 2022
Kubotek3D, the engineering software division of Kubotek USA Inc., has announced that it will begin doing business under the name Kubotek Kosmos, effective immediately. The Massachusetts-based team continues to develop and support core geometric technology and end-user applications targeted at improving efficiency of 3D data use in manufacturing. The Kubotek Kosmos technology was introduced in… The post Kubotek3D to operate as Kubotek Kosmos appeared first on Design World.
Speaker: Kevin Kai Wong, President of Emergent Energy Solutions
In today's industrial landscape, the pursuit of sustainable energy optimization and decarbonization has become paramount. Manufacturing corporations across the U.S. are facing the urgent need to align with decarbonization goals while enhancing efficiency and productivity. Unfortunately, the lack of comprehensive energy data poses a significant challenge for manufacturing managers striving to meet their targets.
Chris Hohmann
SEPTEMBER 9, 2022
While flipping through a vintage (2015-2016) Harvard Business Review (printed) magazine, I was struck by the article “Why Strategy Execution Unravels—and What to Do About It” by Donald Sull, Rebecca Homkes, and Charles Sull. It seems that the problems described 10 years ago are still around us, namely horizontal alignment (coordination) in strategy execution.
Design World
SEPTEMBER 9, 2022
Visit Booth 134102 to get a look at advanced machining and automation capabilities through interactive demos. The booth will preview an enhanced CNC controller, the M800V/M80V Series, which is currently slated for an early 2023 release in the Americas. M80/M800V adds additional functions to highly successful M800/M80 Series, released in 2014, including high-definition 3D machining… The post Mitsubishi Electric Automation to exhibit advanced machining and automation at IMTS 2022 appeared fi
Manufacturing Technology Today brings together the best content for manufacturing technology professionals from the widest variety of industry thought leaders.
Design World
SEPTEMBER 9, 2022
Caplugs now has a Canadian hub in Brampton, Ontario. Formerly Caps’n Plugs, the Brampton facility has a full team of Caplugs product experts, sales support specialists, and a warehouse full of inventory for fast shipment nationwide. This change is part of Caplugs’ continued global expansion efforts and allows for increased access to product protection, hose… The post Caplugs operations expand to Canada appeared first on Design World.
Control Engineering
SEPTEMBER 9, 2022
Learning Objectives. Advanced process control (APC) brings regulatory control elements together to create a more sophisticated structure, fully unlocking the power of automation. APC uses statistical modeling, analytics, model predictive control (MPC), multiple loop control and more. APC lets manufacturers leverage the capabilities they often already have in the existing control system.
Design World
SEPTEMBER 9, 2022
Mantle announced the commercial launch and availability of its metal 3D printing technology for toolmaking. The system simplifies the way mold tool components are made and accelerates how manufacturers making molded parts – a $265 billion market – go from product idea to launch. Mantle’s technology reduces the time to create tooling components by eliminating […].
Plastics News
SEPTEMBER 9, 2022
Improving supplies and softening demand were behind the price drops, although materials suppliers are seeking an increase in September.
Advertisement
As engineers push the boundaries of innovation with groundbreaking hardware products, their success depends largely on the speed and efficiency of production. The challenge? Manual processes and disparate systems lead to multiple versions of documents, incomplete records, and duplicated work, creating a chaotic system of records that is difficult to manage.
Design World
SEPTEMBER 9, 2022
Sensors marketing consultant Roger Grace has issued his 2021 MEMS Commercialization Report Card. Do you agree with his conclusions? The post MEMS 2021 report card: C+ appeared first on Design World.
Plastics Today
SEPTEMBER 9, 2022
The first-of-its-kind material is highly effective at neutralizing viruses such as COVID-19, is cheap to produce, and can be easily scaled.
The Fabricator
SEPTEMBER 9, 2022
MC Machinery, Elk Grove Village, Ill., is holding a grand opening at its new Southeast Technology Center in Concord, N.C., on Oct. 6, 2022, from 9 a.m. to 7 p.m.
Additive Manufacturing
SEPTEMBER 9, 2022
The ability to proactively use 3D digital data in the medical space really came to fruition with the start of additive manufacturing in the late 1980s. Since then, stunning advances have occurred, especially in mass personalization. Take, for example, the commercialization of Invisalign dental aligners in 1999 using indirect 3D printing of forms, and the creation of patient-matched in-ear hearing aid cases by Siemens in the early 2000s, with millions of patients treated.
Advertisement
Outdated or absent analytics won’t cut it in today’s data-driven applications – not for your end users, your development team, or your business. That’s what drove the five companies in this e-book to change their approach to analytics. Download this e-book to learn about the unique problems each company faced and how they achieved huge returns beyond expectation by embedding analytics into applications.
The Fabricator
SEPTEMBER 9, 2022
Properly identifying materials like low-alloy steels or high-alloy steels as they are delivered to a shop is a best practice for metal fabricators.
Control Engineering
SEPTEMBER 9, 2022
Learning Objectives. There are many Ethernet protocols designed for different purposes. Time-sensitive networking (TSN) allows devices and applications that communicate on the multitude of industrial Ethernet protocols. TSN makes information technology (IT) and operational technology (OT) convergence easier. Ethernet Insights. Ethernet can help manufacturers in many industries get a leg up if they use the right communication protocol for their applications.
Seeburger
SEPTEMBER 9, 2022
Since 2012, the European Market Infrastructure Regulation (EMIR) has been providing a uniform framework to make over-the-counter derivative transactions more secure and transparent. Since then, several smaller and larger changes have been made in a number of releases over the years. The regulations that came into force in 2012 were expanded in 2014 and revised […].
Control Engineering
SEPTEMBER 9, 2022
Learning Objectives. In the last 18 months, about one-third of respondents to a Control Engineering survey on industrial computing and network device purchasing said supply chain issues have not improved or worsened. Most respondents purchase industrial computing and network devices as part of a team. Among leading products and services expected to be purchased in the next 12 months: industrial computers, and networking devices for IIoT devices, cybersecurity and I/O uses.
Advertisement
Next-gen manufacturers are redesigning factories to enable agility at every stage of production. From more timely communication between engineers and technicians to technologies that empower real-time collaboration, they’re getting ahead by making iterations and improvements during a build, across the production line at scale. This level of flexibility means they can develop more quickly than their legacy counterparts.
Manufacturer's Monthly
SEPTEMBER 9, 2022
Fleet Space Technologies has launched its expanded manufacturing facility and new state-of-the-art 3D printer. The new technology is a significant boost to Fleet Space ’s capabilities, enabling the development and manufacture of new products in-house and paving the way for its fully 3D-printed Alpha satellite. Flavia Tata Nardini, chief executive officer and founder of Fleet Space Technologies said that bringing 3D printing capability entirely in-house increases efficiency from design to product
Plastics News
SEPTEMBER 9, 2022
Work begins soon on a project that will include both additional extrusion and sorting capacity.
AU Manufacturing
SEPTEMBER 9, 2022
ASX-listed agricultural chemical company Nufarm has entered a long-term technology access and license agreement with Brazilian industrial biotechnology group GrantBio Investimentos to accelerate the development and global expansion of energy cane. . In addition to the deal, Nufarm also acquired energy cane assets from the company, including germplasm, breeding materials, related know-how products in various stages of development, and customer contracts, for USD 25 million. .
Plastics News
SEPTEMBER 9, 2022
TN Composites says it will turn out 14 boats per day once it completes an expansion; weathering difficult conditions; a record number of trainees for Arburg.
Advertisement
Think your customers will pay more for data visualizations in your application? Five years ago, they may have. But today, dashboards and visualizations have become table stakes. Turning analytics into a source of revenue means integrating advanced features in unique, hard-to-steal ways. Download this white paper to discover which features will differentiate your application and maximize the ROI of your analytics.
AU Manufacturing
SEPTEMBER 9, 2022
Article by Daniel Tweer, Managing Director, Rösler UK / AM Solutions. Post-processing is a hot topic in the area of additive manufacturing (AM), which is unsurprising as in many applications, the post-processing step(s) can account for upwards of 50% of the total unit cost for an AM part. So the drive is on to reduce the time and cost of the post-processing step in product development, while simultaneously keeping an eagle eye on the unswerving need for precision and repeatability in production.
Canadian Manufacturing
SEPTEMBER 9, 2022
Even though battery costs are rising, auto companies are rolling out more affordable electric vehicles that should widen their appeal to a larger group of buyers. The latest came on Sep. 8 from General Motors, a Chevrolet Equinox small SUV with a starting price somewhere around $30,000 and a range-per-charge of 250 miles (400 kilometers). You can get range of 300 miles (500 kilometers) if you pay more.
AU Manufacturing
SEPTEMBER 9, 2022
Article by Phaedra Pym, A Way With Words. The inaugural Central Coast Industry Festival concluded with a three-day Expo on September 1–3 at Mingara Recreation Club. Over twelve months in the planning, the event was unanimously deemed a resounding success with over 800 in attendance across the three days, including local business representatives, members of the community and 200 invited high school students for a dedicated careers day.
Drives & Controls
SEPTEMBER 9, 2022
The Danish robotics developer OnRobot has demonstrated what it describes as the first software platform for configuring robotic applications automatically. It claims that the system, called D:Ploy, can cut the time it takes to deploy robots by up to 80%.
Advertisement
Bringing new and improved products to market takes more than just good ideas. It requires agile, iterative production, and real-time collaboration. Most manufacturers recognize the risk of not adapting, but they’re hampered by technologies like MES that haven’t kept up with the pace of hardware innovation. As new manufacturers enter the market with technologically progressive ways of building at scale, existing manufacturers must adapt to stay relevant.
AU Manufacturing
SEPTEMBER 9, 2022
The green hydrogen supply chain is facing short-term scarcity and long-term uncertainty amid investment risks and the lack of decisive policy push, according to a new analysis from Germany’s Potsdam Institute for Climate Impact Research (PIK). . The report published in the journal Nature Energy on Thursday estimated that green hydrogen would likely supply less than 1 per cent of final energy globally by 2035, while the European Union might hit the 1 per cent mark in 2030. .
Robotics Business Review
SEPTEMBER 9, 2022
In Episode 84 of The Robot Report Podcast, Brian Gerkey, CEO and co-founder of Open Robotics describes the development and evolution of Robot Operating System (ROS), and the role ROS plays, and will continue to play, as a catalyst for robotics innovation. The post Open Robotics CEO Brian Gerkey Discusses the Impact and Evolution of Robot Operating System appeared first on Robotics Business Review.
Metrology
SEPTEMBER 9, 2022
Pfingsten has announced the acquisition of Fowler High Precision, a specialty manufacturer and distributor of dimensional metrology hand tools and engineered systems. Headquartered in Canton, Massachusetts with an additional distribution. The post Pfingsten Acquires Fowler High Precision appeared first on Metrology and Quality News - Online Magazine.
Plastics News
SEPTEMBER 9, 2022
Value chain collaboration is increasingly seen as a key element in efforts to boost the sustainability of products and processes within the plastics industry.
Advertisement
Just by embedding analytics, app owners can charge 24% more for their product. How much value could you add? This framework from Software Pricing Partners explains how application enhancements can extend your product offerings. You’ll learn: How to take a disciplined approach to pricing The three elements of the Packaging Decision Framework Ways to structure your new embedded analytics offering Download the White Paper to learn about How To Package & Price Embedded Analytics.
Let's personalize your content