Fastener Distributor Index (FDI) survey for July, 2023 slid dramatically to 40.7 after its 45.6 reading in June, seasonally adjusted.
The Forward Looking Indicator (FLI) dipped once again to 38.8, after its 39.3 reading the previous month.
Key Points:
- FDI softens significantly vs. last month. The seasonally adjusted July FDI (40.7) was substantially lower vs. last month’s 45.6, dragged down by a significantly weaker than expected sales backdrop. Three of the four components of the FDI (sales, employment, and supplier deliveries) saw sequential deterioration, while customer inventories showed some m/m improvement. Quoting activity was said to be high but conversion to actual orders was lacking: “Quoting activity is high, however orders are not matching. Customers are not picking up as much as we expected in July.” This drove the seasonally adjusted sales index to record a reading of just 22.3, down sharply from 41.9 last month. 70% of respondents indicated sales were below seasonal expectations, which is the highest since the early days of the pandemic (April 2020 83%). Sales exceeded expectations for only 10% of respondents. We suspect vacations and/or Fourth of July holiday timing (on a Tuesday) played a role; some respondents suspect so as well: “July bookings really dropped, shipments of previous orders are still going out the door, but new orders [were soft]. Could be vacation time popular in July, or a combination of slowing business and vacation.” Said another participant, “Believe July sales were lower due to the holiday, overall YTD results are strong.”
- FLI remains below 40. The FLI was also slightly softer m/m, decreasing to 38.8 from June’s 39.3. The FLI remains well below 50, indicating further weakening is expected ahead. Softer employment and higher respondent/customer inventories more than offset a slightly improved six-month outlook. On the outlook specifically, a slightly higher percentage of respondents predicted higher activity levels six months from now vs. today compared to last month (23% in June, 17% in May). The percentage anticipating similar activity was relatively unchanged (40% vs. 38% last month), but fewer people now expect lower activity levels (37% vs. 45% in June). Signs of improvement emerging for some respondents; others see stabilization. While the outlook remains on balance more pessimistic regarding the next six months compared to today, some participants are striking a more optimistic tone: “The recent increase in activity from June through July indicates a possible robust end to 2023 based on historic trends. The indication shows promise.” Others see more stabilization (ex. the residential market) than acceleration or deceleration: “Residential related end users are slow to consume high-cost basis inventory, delaying market price adjustments to account for lower material/freight costs. Inventory levels are high for anything residential related, but all other sectors appear to be stable.” With quoting activity still said to be high and the FDI sales index marking a post-pandemic all-time low, perhaps we are closer to approaching a bottom for the FDI index/overall activity levels.
- Fastenal reported July daily sales growth of +3.7%, exceeding our +2.3% estimate and slightly better than normal seasonality. This included fastener sales -1.9% y/y, however, which reflected further m/m deceleration and marked the third consecutive month of y/y declines. Safety sales were +8.3% and other non-fasteners grew +6.6% y/y. Looking forward, we model August daily sales +4.0% y/y which is also in line with days-adjusted normal seasonality. Based on slightly below normal sequential growth thereafter, we have y/y ADS growth rates dropping to the low-single digits for FAST by 4Q23. This outlook is consistent with a string of sub-50 readings in the ISM and the Baird FDI survey of private fastener distributors.
READ FULL FDI REPORT:
FDI_Report_July_2023
Listen to episode #191 of the Fully Threaded Radio podcast for further commentary.
We encourages all North American fastener distributors to take part in the FDI Monthly Survey.
If you are interested in being a more active part of the fastener industry, you can apply to add your company to the FDI survey group. Complete the “Request an Invitation to Participate” form by clicking here. Once verified, you will receive login ID and password information and you will be notified by email every month when the survey period has been opened.
– Fastener News Desk
About the Fastener Distributor Index (FDI).
The Fastener Distributor Index (FDI) was developed as a service to the fastener industry by the FCH Sourcing Network in 2012 to be a new benchmark for the fastener industry. The FDI is a monthly survey of North American fastener distributors, conducted with the FCH Sourcing Network and Baird. It offers insights into current fastener industry trends/outlooks. Similarly, the Forward-Looking Indicator (FLI) is based on a weighted average of four forward-looking inputs from the FDI survey. This indicator is designed to provide directional perspective on future expectations for fastener market conditions. As diffusion indexes, values above 50.0 signal strength, while readings below 50.0 signal weakness. Over time, results should be directly relevant to Fastenal (FAST) and broadly relevant to other industrial distributors such as W.W. Grainger (GWW) and MSC Industrial (MSM).
The FDI Survey website is a resource than can be accessed by anyone, but it can only be updated by registered users during the monthly open survey period, which occurs during the last week of each month.
RELATED CONTENT:
Fastener Distributor Index, Featured
